PDA

View Full Version : Ma010 handling


Simmo
2012.04.23, 08:40 AM
Hey gang. What's the best diff set up for grip racing with MA010? My MA seems to just spin out as soon as I touch the steering.

Simmo
2012.04.23, 05:04 PM
No one knows? It's a misery to everyone? Or people don't use this forum anymore?

kryten
2012.04.24, 05:31 AM
It's more than likely down to the suspension setup than the diff. generally you will have to shim the springs to balance out an awd.
This will have been covered MANY times before,mybe you should take a few minutes to search/read through the awd section?

Action B
2012.04.24, 02:31 PM
I would go straight for the tires honestly. I'm thinking reduce the grip in the front and glue the sidewalls down so they don't roll under.

Simmo
2012.04.24, 10:05 PM
what do yo mean buy "shim" the springs? cut them? ive got hard springs on the front with all alloy front upgrades and the SAS rear suspension. i havent got around to getting the slloy dampers though. they seem rather expensive for a couple pieces of metal.http:///Users/Simon/Pictures/iPhoto Library/Originals/2012/25:04:2012/IMG_1756.JPGhttp:///Users/Simon/Pictures/iPhoto Library/Originals/2012/25:04:2012/IMG_1757.JPGhttp:///Users/Simon/Pictures/iPhoto Library/Originals/2012/25:04:2012/IMG_1758.JPG

Simmo
2012.04.24, 10:07 PM
im trying to load images. but its seems to be harder then usual... how do i upload an actual image with out creating a "linked" image?

Simmo
2012.04.25, 01:22 AM
yeah i definitely need to reduce the grip on the front. I put a light layer of super glue on the front tires to reduced traction and the car handled much better. I know, I know, it's not the most orthodox way to reduce grip. But it helped... for about 5 mins before the glue wore off. ive just purchased a set of narrow 25 degree tires off the internet. hopefully this should help out.