PDA

View Full Version : mr03 front spring bind


poochy
2014.02.19, 07:34 AM
my new mr03 front left spring will bind up to the spring holder---the spring compresses and gets caught up to the spring holder and will not uncompress...

is anybody be familiar with this problem?

yowza
2014.02.20, 08:23 AM
I'm assuming this is the bottom holder. Try changing the spring to the other side. If the problems follows focus on the spring for a sharp edge. If the problem does not follow focus on the holder for burrs or even possible cracks that may be catching the spring.

poochy
2014.02.20, 10:01 AM
I'm assuming this is the bottom holder. Try changing the spring to the other side. If the problems follows focus on the spring for a sharp edge. If the problem does not follow focus on the holder for burrs or even possible cracks that may be catching the spring.

thanks Yowza, i fixed itlast night--no burrs on the bottom holder, but i shaved about .5mm off the left inside bottom holder circle--and that fixed it.