PDA

View Full Version : USB ics cable, what do I need?


mmakam2
2014.11.18, 07:20 AM
What parts do I need to connect my mr03ve to the computer to adjust the settings? The reverse delay and braking are killing me on the mr03ve from factory.

Where can I get it and what is the cheapest option?

abasualdo
2014.11.18, 08:54 AM
http://mini-zracer.com/forums/showthread.php?t=39635&highlight=bluetooth

Above DIY Bluetooth link is the cheapest, most convenient option.

Works very well, makes adjusting settings easy.

I purchased my premade bluetooth adapter from forum member KWT, don't recall price(think around $10).

Also have the KoProp ICS cable, expensive and you need a laptop, as opposed to just using your android smartphone with bluetooth adapter.

briankstan
2014.11.18, 09:03 AM
What parts do I need to connect my mr03ve to the computer to adjust the settings? The reverse delay and braking are killing me on the mr03ve from factory.

Where can I get it and what is the cheapest option?

this isn't the cheapest but works really well especially if you have an android smart phone.

http://www kenonhobby com/PN-Racing-Bluetooth-ICS-Adapter_p_45150.html

here is also a thread about building your own cable and then using different free software out there to do it.

http://mini-zracer.com/forums/showthread.php?t=39635

Hope that helps you out.

mleemor60
2014.11.18, 09:07 AM
Contact member byebye on this forum for the solution.

mmakam2
2014.11.22, 05:21 AM
thanks all, i have a bluetooth ics adapter on the way for $20.

:)

mmakam2
2014.11.30, 10:41 PM
I connected the Bluetooth adapter and it can read the settings, but the write button is disabled, please help!!