PDA

View Full Version : R246 rx7 body, not a very good fit..


new2u
2014.12.18, 05:22 AM
Hello all, I just received my new body, an rx7 from r246 and it seems to not fit the awd very well..

Here are some pics, anyone explain why there not a good fit ?? Is it because it's meant for a mr03 ??

http://i22.photobucket.com/albums/b322/driftizstyle/B0C72C3B-9A88-434D-9AB9-F85459672AF0_zps4c6poz8w.jpg (http://s22.photobucket.com/user/driftizstyle/media/B0C72C3B-9A88-434D-9AB9-F85459672AF0_zps4c6poz8w.jpg.html)
http://i22.photobucket.com/albums/b322/driftizstyle/AAFEC21B-7027-43F9-B65E-FD7E30F57F36_zpsxdanb796.jpg (http://s22.photobucket.com/user/driftizstyle/media/AAFEC21B-7027-43F9-B65E-FD7E30F57F36_zpsxdanb796.jpg.html)

byebye
2014.12.18, 05:43 AM
Not a good fit how?

new2u
2014.12.18, 06:57 AM
The wheels aren't centred with the arch..

imxlr8ed
2014.12.18, 09:01 AM
Looks like the drivers side clip isn't engaged properly. Do you have it on an awd or an MR02? If it's on an 02, I'd check the Hplate to make sure it's on right.

new2u
2014.12.18, 09:50 AM
It's on an awd, and I have checked it over and over. I can't seem to make it fit correctly. It's the front wheels, they don't align at all with the centre of the wheel arches !!

imxlr8ed
2014.12.18, 02:42 PM
Is the inside of the lower windshield contacting the top part of the chassis on the left hand side?

Pierro
2014.12.18, 04:52 PM
Is the inside of the lower windshield contacting the top part of the chassis on the left hand side?

Hi!

As it's an AWD, check the clearance of the bottom part of the winshield indeed. I had the problem with older version of the RX-7 (kyosho).

new2u
2014.12.18, 06:35 PM
Ah yes ! Your right I'm not with the car at the moment but now I remember this with my old one now you mention it !! I will clear this tomorrow !! Old tips aye !!