PDA

View Full Version : Kysosho announcing new Body tomorrow


KWT
2015.01.16, 10:28 PM
Mini-Z NEW body

"Weider Modulo NSX CONCEPT-GT GT500 2014"
and "EPSON NSX CONCEPT-GT GT500 2014"

lfisminiz
2015.01.17, 01:15 AM
Could be a good racer. :)

machgo5go
2015.01.17, 08:55 AM
Mini-Z NEW body

"Weider Modulo NSX CONCEPT-GT GT500 2014"
and "EPSON NSX CONCEPT-GT GT500 2014"
https://scontent-a-lga.xx.fbcdn.net/hphotos-xfp1/v/l/t1.0-9/10885195_797468593669696_5509992761997591001_n.jpg ?oh=135a0083dbf3788932720fcd3e40c243&oe=556C7E17
https://scontent-a-lga.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10920904_797468573669698_8077133044258577487_n.jpg ?oh=f328517a7a2c278b4109ce676806d5ac&oe=5561AC87
https://scontent-b-lga.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10917818_797494713667084_8334360490583593474_n.jpg ?oh=28f177229d2d0e5413570b1b7d919a63&oe=55258103
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10351816_797494753667080_1500432618780596478_n.jpg ?oh=83a45f34cb8f3f8042ad8683a6f1b064&oe=5527B966&__gda__=1429110540_886fe34ddd602d39dc59ccd70f559da 4
https://scontent-a-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10926366_797522506997638_7802411641500670642_n.jpg ?oh=17dda5e6fd68b9aac49096bab248506b&oe=555F4CA9
https://scontent-a-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10885218_797522530330969_783320463497102127_n.jpg? oh=c4393265ab68feed4b6132200eaeed2a&oe=5560EE6E

mleemor60
2015.01.17, 09:44 AM
Very attractive. Especially the second one but way, way too much kibble to trim off. They both look like fugitives from the DTM series. Any idea on wheel offset's?

machgo5go
2015.01.17, 10:00 AM
Very attractive. Especially the second one but way, way too much kibble to trim off. They both look like fugitives from the DTM series. Any idea on wheel offset's?
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10645284_797545900328632_152436756887532257_n.jpg? oh=4882a7e23a1818592592339f27cfa696&oe=552BB9F6&__gda__=1429405887_0025e0add9b359cb2bb186949450e1f 2

Wheel Base LL(98mm)
Wheel offset
Front Narrow +1
Rear Wide +1

cowboysir
2015.01.17, 10:32 AM
If ever there was an autoscale that needed inch up wheels to fill those ridiculously large wheelwell its those bodies.

Very nice looking but those are huge wheel arch.

mleemor60
2015.01.17, 10:53 AM
Not ideal at +1+1 but workable. Maybe a set of fender skirts or Sauber rears with LM tires to close the rear gap.

arch2b
2015.01.17, 11:03 AM
If ever there was an autoscale that needed inch up wheels to fill those ridiculously large wheelwell its those bodies.

Very nice looking but those are huge wheel arch.

not an entirely bad thing in my opinion. with the smaller offsets, maybe they needed to upsize to avoid rubbing. i almost always have to play with nose clip and shim height to keep all the +2 and +3 bodies off the wheels at full lock. if they made them smaller, guys would just be dremeling them open anyway so saved them the time.

arch2b
2015.01.17, 11:04 AM
Not ideal at +1+1 but workable. Maybe a set of fender skirts or Sauber rears with LM tires to close the rear gap.

i may be in the minority here but glad to see more racing bodies that aren't +3 all around.

Mania
2015.01.17, 04:51 PM
Very attractive. Especially the second one but way, way too much kibble to trim off. They both look like fugitives from the DTM series. Any idea on wheel offset's?

That's because Super GT and DTM have merged their technical regulations in 2014.

Mania
2015.03.29, 12:20 PM
http://blog.go-wml.com/?eid=983683

http://img-cdn.jg.jugem.jp/295/1963089/20150329_1882746.jpg

http://img-cdn.jg.jugem.jp/295/1963089/20150329_1882748.jpg

http://img-cdn.jg.jugem.jp/295/1963089/20150328_1880917_t.jpg

http://img-cdn.jg.jugem.jp/295/1963089/20150328_1880916_t.jpg

in-hand pics from a japanese blog

byebye
2015.03.29, 03:10 PM
Good stuff. Thanks for sharing.

imxlr8ed
2015.03.30, 08:24 AM
Wall snagger... will be wanting wider offset too but still glad they are producing.

mleemor60
2015.03.30, 09:45 AM
Without having it in hand it's hard to tell. Maybe a set of .5 front and 1.5 rears to balance it would do the trick. Agreed on the snagger. Once most of the kibble is ground off it would go.

arch2b
2015.03.30, 01:47 PM
the front splitters look like a simple fix for those classes where you can gut the car. the back looks like it has a good deal of weight hanging way back. this always felt a little weird for my driving style on similar cars. it certainly looks good though :cool: i'll hold off myself unless another more enticing livery comes out.

herman
2015.04.03, 10:36 PM
Looks like another cool body... But not sure how it'll do or perform as a racing body... Agree with the wall snagger comment (from imxl8ed/mleemor60), as you can see in the first pic posted by mania one front splitter on the left is gone, and both of them are missing on the right... Body also seems heavy in the rear and maybe in the front as well.... Lastly the wheel well looks huge, (from cowboysir's comment)... Maybe lowering the body could solve this? Or relocating the body clips? Would love to read a review of this body...