PDA

View Full Version : Radio games


Solo1
2015.01.21, 04:47 PM
Is there anyway to transplant the guts of a flysky it4 receiver to a mr03s board? I need a radio for my z's and just ordered a flysky it4 with 3 receivers and would like to use this radio with the cars. HELP PLEASE!:D

mleemor60
2015.01.21, 05:02 PM
I would think that there is at least a chance if you ordered it with the same broadcast parameters as the FS-3GTC transmitter.

Solo1
2015.01.21, 05:06 PM
no can do as far as i know the it4 has the 2 at the end which is different as far as i can tell
2.4G system: AFHDS 2
Code type: GFSK
Sensitivity: 1024

fs3-3gtc
.2.4G system: AFHDS
8.Code type: GFSK
9.Senditivity: 1024

need someone good with electronics to fill me in on this stuff electricity not my strong suit

abasualdo
2015.01.22, 08:31 AM
According to my research, the FS-IT4 with the latest firmware should have a setting to transmit in AFHDS for compatibility with older non-telemetry receivers.

In theory, it should work?

Racer-HH
2015.01.22, 10:36 AM
I have a similar controller (Absima CR4T (http://www.absima.com/nc/en/products/controll-systems/radio-systems/cr4t.html)) and also can switch from the AFHDS2 to AFHDS. Works just fine with my MotoRacer. So I guess you should have no problems as well.

Solo1
2015.01.30, 11:01 AM
Well I have found that the fly sky it4will work with the miniz. It won't bind but it seems to work well so far. The ch4 must be reversed to get the car to steer fully but otherwise seems good