PDA

View Full Version : Individual oil damper for MR-03


ilove599xx
2015.06.10, 12:09 AM
http://www.kyosho.com/jpn/support/instructionmanual/r246/pdf/R246-1341-1342_Individual_Oil_Damper.pdf

https://www.flickr.com/photos/131805935@N05/18474579940/in/dateposted-public/

on instruction 2, the blue metal bar should be installed on the front upper cover, but I found out MR03 Sports doesn't have the same front cover, my front cover has side parts with tube holes already just like the R246 metal bar.

Should I get another front cover? or am I doing anything wrong? or this oil damper can't be use on 03 sports?

LED
2015.06.10, 12:24 AM
It's the same cover as a standard MR03.
You have to cut them off :-)
Should be in the manual.

ilove599xx
2015.06.10, 03:21 AM
I don't see that on the manual,

is there any other upper cover product I can just purchase without cutting anything?

I am not confidenct to cut them off

LED
2015.06.10, 11:03 AM
I don't see that on the manual,

is there any other upper cover product I can just purchase without cutting anything?

I am not confidenct to cut them off
You can get the atomic top cover I think, but that will costs you money.
It will be probably be cheaper to buy 3 standard covers to replace the one you cut.
Just try it, you cant do anything wrong with it.

200sxr
2015.06.13, 01:09 AM
Assuming you are running the wide front end the blue cross bar will fit over the narrow front top cover without having to cut anything.

I have brought the same part, I actually fit the blue bar back to front to get a bit of caster which is working great however the same cannot be said about the suspension binding on the king pin.