PDA

View Full Version : Lancia Specs?


Blf
2016.03.31, 07:01 PM
Is it HM only I guess? and what's the wheel base

HM is the only config I've never run in miniz or dnano for that matter so I'm skeptical. I love the body shell though

TeeSquared
2016.03.31, 07:33 PM
The Lancia (Delta?) body is 90 mm narrow and yes, only the high motor configuration will fit unless you use the PN 90 MM mid motor pod.

I'm not sure about the Stratos.

xmodcanuck
2016.03.31, 07:55 PM
Given the hatchback body style wouldn't it also fit a 90mm RM mount?

The Lancia Stratos is 86mm. 0N 0W.

Blf
2016.04.01, 04:39 PM
Given the hatchback body style wouldn't it also fit a 90mm RM mount?

The Lancia Stratos is 86mm. 0N 0W.

Nice so I can just change the nose out from my 86mm RM Narrow 906 Porsche if I want to use it.

TeeSquared
2016.04.01, 07:09 PM
The Delta body will not fit the RM motor pod.

Some hatchback bodies will fit the RM pod. The Golf GTI and R32 both fit the RM pod but that is because they were released for the MR-01 or 015 way back when.

I believe the Delta was only ever released for the AWD.

Blf
2016.04.08, 12:14 PM
So I have the Lancia Delta HB 90mm bodies and the PN 90mm mount for this application. I want to use it with an MR03 chassis so is it Wide or Narrow?

I can use it with a NON-awd chassis right?????

Blf
2016.04.08, 12:15 PM
The Lancia (Delta?) body is 90 mm narrow and yes, only the high motor configuration will fit unless you use the PN 90 MM mid motor pod.

I'm not sure about the Stratos.

I just saw that this is N

arch2b
2016.04.08, 12:56 PM
Depending on what offset the front wheels were set at, it may be possible to use the wide front end.

TeeSquared
2016.04.08, 04:30 PM
Offset for the Delta is 0/0, so narrow is the only way to go...

herman
2016.04.10, 01:19 AM
Hmm... So what body are we talking about here...
As far as I know there are two Lancia bodies that Kyosho came out with
First one was the Lancia Stratos which initially was for the mr01, with a S wheelbase or 86mm rm motormount setting, you could use this with a mr03 N front and a S wheelbase with rm motormount.

Then there is the Lancia delta, which runs on the ma010 awd chassis with a M wheelbase or 90 mm, with 0 offset rims.

Although I have a Lancia delta, I really haven't tried putting it on a mr03 chassis. But I figure if you can... You just have to use the correct motormount which may either be a HM or RM. or even a third party motormount.

Hope this helps...

Blf
2016.04.10, 03:30 AM
Good info - I am a tally referring to the delta not stratos

I bought the PN 90mm mount so I can run with a mid mount type system and try to make it perform. Should be run to rip that around the track :)