PDA

View Full Version : Would this body fit on JR128-R01???


FastDad1
2018.06.21, 01:07 AM
Hello,

I just purchased the RTR JR128-R01. Does anyone know it this "MZP444W-B ASC MA-020 AUDI R8 LMS White" body will fit?

http://www.kyoshoamerica.com/MZP444W-B-ASC-MA-020-AUDI-R8-LMS-White_p_25159.html

The description says:

Audi R8 LMS white autoscale body. fits MA010 / 015 / 20.
Wheel Base:LL (98mm)
Wheel Off Set:F:N4.5mm / R:W2.2mm
Wheel Width:F:N8.5mm / R:W11mm

I'm new to RC cars so I have a lot of questions. :)

Thank you!!!

TPDazzle
2018.06.21, 12:03 PM
That body should work just fine. I don't have the JR128-R01, and I've only seen one in person once, but they have an adjustable wheelbase from 98 mm to 102 mm, so your wheelbase should be good, and they have Kyosho compatible front body mounts. Mini Z bodies come in different wheelbase and widths, so you might need to get different wheels with more offset, the Audi is a very wide and stable handling body. The offsets you listed are for the Kyosho 4wd cars, and there is a very good chance they will not be correct for yours. Try the body on with the wheels you have and go from there. You want to make sure the wheels don't rub, and don't stick out of the wheel wells (they will catch on other cars and the track rails.) The Audi is one of my favorite bodies, so I hope it works out for you. Good luck!

EMU
2018.07.02, 03:24 PM
On a wide front end (MR03 W, MR02, Jomurema) you would use a 2mm front with 2.2mm rear.

FastDad1
2018.07.06, 12:30 PM
I appreciate your replies. I'll post photos once I get a hold of the body and new wheels.

J-Milz
2019.10.24, 10:08 PM
https://www.pastepic.xyz/images/2019/10/24/6BCDD7E8-1547-4A76-89BF-A737EA6A9A025692b01e09d5254b.jpg
I haven’t been on here in a while but I did purchase a Jomurema. The Audi body is a direct fit with +2 f/r wheels.
https://pin.it/ad2gnozxr4omuz
http://https://www.pastepic.xyz/images/2019/10/24/6BCDD7E8-1547-4A76-89BF-A737EA6A9A025692b01e09d5254b.jpg
https://www.pastepic.xyz/image/SkIcC