PDA

View Full Version : Murdertown Racing Club GTG #6 - 2/15/20


arch2b
2020.02.16, 06:25 PM
Just want to say hats off to Shafiq and the team for a great track design and good run with such a large crowd! I believe the largest crowd to date?! the timing was much improved and moved more quickly. I would recommend Mains be kept to fewer than 9 as it became a derby or sorts in the center in particular with 8-9 cars on twisty 2 tile sections.

I'm editing video of mains right now and will continue to upload them.

70 Comp Class
A Main (https://youtu.be/l4Q1pAYOTtU)
B Main (https://youtu.be/FpN7wx_nucw)
C Main (https://youtu.be/FF6Xbz1Bm8k)

Modified Class
A Main (https://youtu.be/PyKBi2m0m6w)
B Main (https://youtu.be/Uuona6HUcTI)
C Main (https://youtu.be/nOlnLGAPSao)

If you can, please share the zround results.

Mike Keely
2020.02.16, 10:03 PM
Thanks for posting the races Ray.

EMU
2020.02.17, 12:51 AM
Thanks for capturing the videos.

Here are the results

EMU
2020.02.17, 12:52 AM
Results page 2

arch2b
2020.02.17, 07:27 AM
Thanks for sharing the results. The video’s take upwards of an hour to process so it might be a couple days to get through them all. I should have two more up tonight. I can’t share them directly to the Murdertwon page. Any ideas on how to get around that?

EMU
2020.02.18, 03:40 AM
Can you post the Youtube link in the MT group page? I am unfamiliar with the ins and outs of FB myself...

arch2b
2020.02.18, 07:50 AM
I tried and it doesnít seem to let me share to that page. Iím not a FB professional so unsure if it has something to do with the way itís setup or permissions, etc. Anyone else should be able to share my original post as well I believe and could, in theory, share that to the MT page. If Iím simply doing it wrong, someone please let me know. Iím more than happy to post it/share it to the MT page if possible. I want to get it out in whatever manner best serves MT. My club page is not monetized so no qualms from me sharing whatever content there is :)

smokey_truck
2020.02.18, 08:07 AM
I tried and it doesnít seem to let me share to that page. Iím not a FB professional so unsure if it has something to do with the way itís setup or permissions, etc. Anyone else should be able to share my original post as well I believe and could, in theory, share that to the MT page. If Iím simply doing it wrong, someone please let me know. Iím more than happy to post it/share it to the MT page if possible. I want to get it out in whatever manner best serves MT. My club page is not monetized so no qualms from me sharing whatever content there is :)


I just copied and pasted your link of AMAIN on MT Facebook group page and it is showing fine, is that what you are looking for?

arch2b
2020.02.18, 08:58 AM
Not talking about cut and pasting YouTube link but certainly one way to do it. From YouTube, i can only manage to share to a page I manage. From there, anyone should be able to share that post to where-ever if I understand it correctly. Looking to avoid reposting a multitude of time as that quickly becomes tedious and time consuming as Iím hitting forum/FB, etc. and all this adds up quickly and being done after a 10-12 workday.

smokey_truck
2020.02.18, 12:42 PM
Not talking about cut and pasting YouTube link but certainly one way to do it. From YouTube, i can only manage to share to a page I manage. From there, anyone should be able to share that post to where-ever if I understand it correctly. Looking to avoid reposting a multitude of time as that quickly becomes tedious and time consuming as Iím hitting forum/FB, etc. and all this adds up quickly and being done after a 10-12 workday.

Understood, I didnot think you were looking for trival stuff but I shared this thread on MT Facebook group that should land anyone, donít know if we can share directly from YouTube to a page in Facebook.

arch2b
2020.02.18, 12:54 PM
Itís rather straightforward to share to your page, or a page you own from YouTube. Not sure how to share to a group or someone elseís page without simply sharing an existing post. Even then, it seems to limit where it can be shared vs. creating a new post on the MT page. Trying to avoiding having to create a multitude of new posts as that is inefficient use of time. Iím sure there is a way, Iím just too much of a FB noob to know how. :p

EMU
2020.02.18, 01:13 PM
I have issues sharing certain posts as well. I have you moderator privilege in three group, see if that changes anything.

arch2b
2020.02.18, 04:13 PM
I think that works. I was able to share my post to the MT page.

EMU
2020.02.18, 04:25 PM
Great! Thanks for taking and posting the videos.

arch2b
2020.02.19, 06:11 PM
all video's are uploaded.