View Full Version : bearing question... just curious...

2003.01.22, 12:50 AM
I have a full set of mzr.com dry bearings in my ride (of course) and was wondering, I know on the non gear side, the back wheel doesnt have bearings in it just black spacers, in the front and back of the rim... is it worth it just to get two extra bearings just to put in there anyway??? I have heard there is no need but would it be cool anyway??? just curious...

Ken Mifune
2003.01.22, 12:58 AM
You can't put bearings on the inside of the rear rims because the wheel hubs go there, and a bearing on the wheel of the non-diff side wouldn't spin. So why do it or pay for it.

2003.01.22, 01:02 AM
ok cool just asking... on the powerline diff, I swear there is room for a bearing on the inside of the rear wheel, but I could be mistaken...:)

2003.01.22, 01:20 AM
If you want to put in bearing on the non-spur side and you have ball diffs, you'll have to get 2 different sizes. One 2x6 and one 3x6.

2003.01.22, 03:55 AM
Thats where I put my old duratrax bearings.