PDA

View Full Version : calling mr. mystere-look at these fet upgrades


herman
2003.02.24, 11:49 PM
mr. mystere... (or any other guys who know their stuff)...

saw this on a h.k. site...

http://www.pbase.com/jconline/miniz

pls. check out the 3 fet / 4 fet / enhanced 3 fet pics... and please tell us what's goin on.... :D

check this out... bumper/antenna/ground signal reflector...

http://www.pbase.com/jconline/minizmod03&page=2

looks like a good idea... can anybody be kind enough to explain? especially on that ground signal reflector thing... would it help reflect signals or help with reception, or both... thanks for any replies...

Draconious
2003.02.25, 04:21 AM
I believe they just set it up with a 4 fet board, rason for for all the wires, by that, I mean they are not stacked, its a different way of wireing a difrerent type of fet, I think those are non dual channel N/P fets.. and just single channels...

Tango
2003.02.25, 02:58 PM
Dra,

U r rite!

Joe put single N/P on the PCB!

MysterE
2003.02.25, 03:43 PM
herman, the 3rd fet on top is to boost the forward only, using a non half bridge so-8 fet (Nch & Pch drain are not connected together). I'm still looking at the 4 fet.

MysterE
2003.02.25, 03:51 PM
the 4 fet one is using 2 pairs of single channel s0-8 (Nch & Pch) for forward & reverse. Both 3 and 4 fet are probablt connected to the battery directly with the white wire /red & black wire. I believe I can replicate this one but where's the originality with that!

the enhanced 3 fet is obviously a secret kind of fet, also non half-bridged.

I guess back to more research for me! :D

wrcracer
2003.02.25, 07:51 PM
i dunno who's site this is, but the owner of this white CLK should be shot.....
http://www.pbase.com/image/11746162

mugen power?! its a MERCEDES;)

EDIT: sorry about that, im sick, and not really all there upstairs.....
but still, thats just dumb

BJS-TF
2003.03.03, 06:51 PM
Haha... Joe is use 1 N channel and 1 P channel FET and connect a 3004 for reverse use only!!! I think not same to you guest...
Of course this design also have problem. I've teach him how to stack G4 format FET.:D