Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   MantisWorx (http://mini-zracer.com/forums/forumdisplay.php?f=184)
-   -   Mantisworx tri-shock (http://mini-zracer.com/forums/showthread.php?t=36162)

MantisMMA 2011.03.17 02:28 PM

Mantisworx tri-shock
 
just a heads up but i am working on a proper tri-shock system for the F1. my goal is to get one designed that will fit under the body and utilize the popular PN mount. so more than likey it will have some sort of cantilever design since thats the only way to get all three shock mounted fore and aft. as i start to come up with ideas i will post some of the CAD work to see what ya think! the shocks are on order and should be here in a few weeks since they are coming from HK.

lfisminiz 2011.03.17 04:06 PM

Sounds good...Marcus.:)

MantisMMA 2011.03.31 12:40 PM

shocks came in today! should have a working prototype next week!

Traveler 2011.03.31 01:27 PM

That was quick! Look forward to see what you come up with!

MantisMMA 2011.03.31 01:44 PM

i have been looking at it for the last hour or so and its going to be a really tight fit to get it under the body especially the Ferrari. it looks like its definately going to have to be a cantilever style and the board will need to be moved forward. i already ahve instructions on the board movement from the old cantilever setup.

MantisMMA 2011.03.31 06:00 PM

well here is the first prototype, mild clearancing necessary on the Mclaren body, no go for the Ferrari without some bodywork (which is not hard to do). a few more dimensions to change. and then i will send out for testing.:
http://i770.photobucket.com/albums/x...3-31175625.jpg
http://i770.photobucket.com/albums/x...3-31175548.jpg

lfisminiz 2011.03.31 06:48 PM

Looks like a cool concept. Trimming the body some isnt a big issue i wouldnt think.

MantisMMA 2011.03.31 07:35 PM

its the only way to get it under the body. and i like the fact that it seperates up and down from sideways. hows testing going? havent heard any feedback from ya yet!

lfisminiz 2011.03.31 09:18 PM

Tonight.........ill let you know.;)

VAzRACER 2011.03.31 10:42 PM

Beautiful! Thats a much easier way then how I was going about it.

I will be doing extensive testing on the new plates this weekend. We had a race last weekend and I was going to test there but didnt have time. Plus the track was green and grip was non exsistent. I'll be on a track I know well this weekend so Ill be able to really get an idea of how they work. They should compliment the tri-shock setup very well.

EMU 2011.04.01 01:30 AM

I really like how this is designed. There really is very little space under these bodies, and if this works the way I think it does, you fit a lot of adjustability in a small package. I look forward to testing it :)

tudor_47 2011.04.01 01:44 AM

Interested to find out how it compares to the Kyosho DPS?

hpgod 2011.04.20 09:28 AM

hopefully the new gernation shocks limit over extension/droop. That was the problem with PINOYBOY and mine tri shock f1s a 2 years ago. great traction but if you had a bad wreck/traction roll the pod could droop and over extend the SAS shock would fall apart. No incidents and they were great.

But I have been running a PN pod with a lower shock mount and atomic disk damper and traction has not been an issue once all the body clearance were solved, multiple side to side issues.
atomic stock r - and fetted 2.4 board - glued tires are required

MantisMMA 2011.04.20 10:22 AM

i did run into that when designing it, it is tricky to find the right amount of movement and spring combo. They are the same shocks used on the reflex MR tri-shock so i dont foresee that being a problem, secondly the shocks are activated by a cantilever so any up and down movement from the pod doesnt effect the trishocks at all, they only move when the pod is twisted! one thing i did find necessary is to drill a vent hole in the shock to prevent unwanted rebound.

MantisMMA 2011.04.26 05:55 PM

well, just got the approval from Matt! it works very well, gets rid of the dreaded tweak and increased traction! so i will open up pre-order in a day or so and begin production next week.


All times are GMT -5. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com