Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   Setups (http://mini-zracer.com/forums/forumdisplay.php?f=8)
-   -   Camber Question (http://mini-zracer.com/forums/showthread.php?t=28017)

Jebroni 2008.03.26 07:19 AM

Camber Question
 
Ok.... someone answer me straight here. The difference between Camber, and Degree is?????????? Like is a +2 ti3 rod the same as a 2 degree camber? This **** is mad confusing.






Thanks

Flashsp-2 2008.03.26 07:41 AM

Looking at the top of the car, front toe is like this / \ or \ /. Toe out is when the front tires are pointing outward, and toe in is when the tires are pointing inward, all relative to the front.

Looking at the front of the car camber is like this / \. Nobody ever uses positive camber, only negative, where the tires are pointing in toward the chassis. It's best to find a degree (I use 1.5) that gives you even tire wear over time. Stock cars usually use a little less camber as they have less body roll, mod typically runs a little more due to the extra speed, which creates more body roll, and causes the tires to roll further onto the edge.

Just run a search, there are a ton of threads covering all this stuff, especially the ones written by magic, which are pretty in depth.

herman 2008.03.26 10:51 PM

try this link...
what is camber and caster?
http://mini-zracer.com/forums/showthread.php?t=27222

also this link...
what is toe in / toe out?
http://mini-zracer.com/forums/showth...953#post295953

hope this helps

DJ Kyosho 2008.03.27 01:10 AM

Camber and toe are discussed here also.

EMU 2008.03.27 01:55 AM

Great links guys. Lots of good information.

Jebroni 2008.03.27 06:21 AM

Quote:

Originally Posted by EMU (Post 295973)
Great links guys. Lots of good information.


Yeah, thanks guys... I appreciate all the help =)


All times are GMT -5. The time now is 09:02 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com