Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   Motor Tech (http://mini-zracer.com/forums/forumdisplay.php?f=33)
-   -   Motor bearing sizes and availability? (http://mini-zracer.com/forums/showthread.php?t=30828)

ianc 2009.02.02 12:02 PM

Motor bearing sizes and availability?
 
Hi there,

I recently acquired some older PN motors; Speedy AWD, Speedy 05, etc, which are non BB cans.

The cans themselves are good quality however and drilled for aftermarket mounts.

I've removed the bushings and would like to install some bearings in them. I find, however, that wheel bearings are a bit too small for the armature shaft to fit.

Does anyone know the size and\or a good source for motor can bearings?

Thanks for the help,

ianc

XMDrifter 2009.02.03 09:20 PM

usually 2mm inner diameter.
try going to r*m*** and finding the atomic motor ball bearings. a bearing replacer tool can also be helpful

ianc 2009.02.04 10:20 AM

Thanks XM,

Your response got a little mangled, so I'm assuming you mean RC Mart?

ianc


All times are GMT -5. The time now is 06:05 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com