Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   Reflex Racing (http://mini-zracer.com/forums/forumdisplay.php?f=124)
-   -   Raised lower tower bar set for mr03 question (http://mini-zracer.com/forums/showthread.php?t=38241)

CristianTabush 2010.10.29 09:40 PM

I am working on some kinks out so that we can make a new batch. The type of cut is very hard to make for the balls and the factory has a hard time getting them right.

I will see what can be done. Give me about 10-15 days and I'll have an update for you guys. It seems that this part is just a late bloomer, I have had a lot of inquiries lately for it.

If I find an adequate result, I will place a pre-order up for them. If I can get enough pre-orders, I will make them, if the interest is still low, I will refund people's money.

On another note, we are working on a new Disk Damper/tri shock system. It should be available in about 3 weeks.

TheRinger 2012.07.30 11:51 AM

Raised lower tower bar set for mr03 question
 
I was wondering when this would be back in stock?

chad508 2012.07.30 03:12 PM

last CT told me it was going to be a little while. send him a message as he may still have a few thats not showing instock.

Tapir 2012.09.20 04:35 AM

Anyone got news on the lower bars?
We are 3 drivers wanting to go this route since we are fighting to keep the cars on their wheels:p

chad508 2012.09.20 07:52 AM

Have you tried just the long arms with the stock lower bar? It worked for me before I got the lower bars in. Using that and the spring under will help out with traction roll

Tapir 2012.09.20 04:09 PM

Yes:)
But the cars with the lower tower are even better, so that is why we want this.

bompie 2012.10.21 04:02 PM

im also longing for one or two. hope they restock soon.

regards johan

NoBrainer 2012.10.21 04:59 PM

I just need 3....

skyler 2012.10.21 05:13 PM

I just asked Cristian about these the other day. He said they are discontinued for the time being. I think he got really bummed when he had to grind them all to make the balls fit.

Tapir 2012.10.22 10:46 AM

I really hope they can manufacture new before someone else makes a copy as well.
They came up with the idea, and really deserve the sales themselves.

Pleeeease:o make a new batch. It sold out fast as far as I can remember, so I think the world are ready for more.
I have looked through every webshop I can think of, and everybody are out of stock.:confused:

My local dealer have been out of stock forever, and only at the small club I race at needs at least 10 - 15 pcs.

unearthed name 2012.10.22 10:48 AM

yes please make a new batch. i have a pair of extra long of upper arms waiting to be paired with the new under arms.

unearthed name 2012.10.22 10:35 PM

ok, all fingers crossed, we'll get a new batch and also new rear shock?

Pierro 2012.10.23 02:31 PM

I would equip other cars for sure!

On my F430, this with the reflex front end is the best I used so far on this car.

mugler 2012.10.23 03:36 PM

with this setup which toe bar is to be used to get -0- toe angle?
and is the camber key still usable with longer arm setup?

chad508 2012.10.23 05:40 PM

the camber key still works but you have to use the narrow setting and its off by one hole. so 0 is 1 and so on. i use the kyosho +6 but it still could use a little longer but no one makes one any longer that i have found


All times are GMT -5. The time now is 07:15 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com