Mini-z body 'Cuda
'70 Cuda body for Mini-z MR02-03W
Wheelbase 98mm Offset 0F/+1R Weight 17.8gr Link This body has been widdened by 108% to fit a wide chassis, and so the proportions are not completely true to scale. The overall dimensions are similar to the Kyosho Mustang. Weight comparison: K Mustang 40.9gr (with paint and glosscoat) '70 Cuda: 17.8gr without paint. The front grill is open to allow air flow. Feel free to post your own realisations here. This thread is also open to requests for improvement of this body. http://www.nanospeeders.com/photos/s...214cuda/00.jpg http://www.nanospeeders.com/photos/s...214cuda/01.jpg http://www.nanospeeders.com/photos/s...214cuda/04.jpg http://www.nanospeeders.com/photos/s...214cuda/02.jpg http://www.nanospeeders.com/photos/s...214cuda/06.jpg http://www.nanospeeders.com/photos/s...214cuda/07.jpg http://www.nanospeeders.com/photos/s...214cuda/09.jpg http://www.nanospeeders.com/photos/s...214cuda/10.jpg |
Nice, can a convertable version be done for a Nash Bridges car?
|
looks great! how does it handle? what offsets are recommended?
|
Quote:
I mounted 0/+1R and it is perfect. @Marc I don't know it will be a good idea with the large exposed interior section and no way to make a clear windscreen. |
Very, very nicely done. Step one to the T/A nearly complete. All we need now is the Camaro, Mustang and the Javelin.
|
@Marc I don't know it will be a good idea with the large exposed interior section and no way to make a clear windscreen.[/QUOTE]
Instead of exposed interior, you could do just a flat section with "humps" simulating the seats. Windscreen could just be painted black like on regular bodies. Being convertable doesnt necessarely mean you have to have a completely opened center section. Kind of like make a half dumby interior if you will. Just something that resembles Nash's car. |
It is now just like it should be, green :D
http://www.nanospeeders.com/photos/s...cuda/green.jpg @ mleemor60: the Camaro is already done @Marc: this is just not a priority, many others are on the list. |
No problem, just loved that show! Awesome looking bodies there mate! Can we get a picture of that Cuda next to the Camero? Bet they look sweet together!
|
Quote:
|
I started detailing it. I don't know if I will go the complete Hemi decoration (quarter panels and scoop in black) and I don't know if I will chrome the bumpers.
http://www.nanospeeders.com/photos/s...214cuda/13.jpg http://www.nanospeeders.com/photos/s...214cuda/14.jpg http://www.nanospeeders.com/photos/s...214cuda/15.jpg http://www.nanospeeders.com/photos/s...214cuda/16.jpg http://www.nanospeeders.com/photos/s...214cuda/17.jpg http://www.nanospeeders.com/photos/s...214cuda/18.jpg |
Not as a racer but as a streeter it needs the billboard's
|
So, how much can I get one of these for man?
Edit: nm, just noticed the whole new section and the shop link :D |
Go to his shape ways page where you purchase them from. There is a link in his signature.
|
Can the windshield area be removed and how does it impact the rigidity of the body??
|
To use an Ilap transponder on my Exige, I drilled a 3mm hole on the bottom of the windshield. Hardly noticeable... I too would prefer a front clear window, but this will work.
|
All times are GMT -5. The time now is 03:25 AM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com