ics not comunicating with car help please
i bought the ics from kenon and i don't seem to be able to get it to work
i think i'm missing something, 1]do you have to have batteries in the car 2]do you have to have tx on 3]when i try to close program it won't unless i use task mgr i did get the light on the car to come on dim,but still nothing loads or reads any help would be appreciated |
Quote:
you need to:start the program ,set the com, hook it up with no batterys tx and switch off and then hold the bind button toll the light comes on solid |
thats the step i missed thank you yas ;)
how was your awd |
Quote:
so now i have diff in the front and rear 94 mm with a nsx body like tj but i needed to install the wing.... the rear was way to loose awd seems easy to drive.... i can be aggressive and it steers better on throttle ididnt have to change my drive style too much every thing is new and has too much engine braking/frictional loss.... seems slow compaired to my pan.... i will be working on some friction reduction today:D |
thats good to hear but i still think if you can get the front end stiff enuff the one way will work to your advantage
|
i tried whay yasuji said to do and still have a no communication error pop up please anything else i might be missing
|
Quote:
|
when i push program it comes back saying did not communicate
|
oh and when i go to close the widow it will not close unless i go to task mgr to end task
|
r u using the rt program? does it say mini-z asf manager v1.0 on the top of the window or does it say mini-z hg?
|
mini-hz i dont see asf 1.0,i must be really blind or stuuuuupid
|
Quote:
|
|
thanks i'm going to tryit now
|
ok tried it it seemed to work but what is v.inertia do and how do you know that it loaded or programmed the car because i hit program i didn't see any lights flash or anything else happen but when i hit read it read what i programed it to so did it work
|
All times are GMT -5. The time now is 09:14 AM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com