Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   Mini-Z Racer MR-03, MR-03 VE, Sports Series, EVO (http://mini-zracer.com/forums/forumdisplay.php?f=173)
-   -   Autoscale options for MR03 and motor (http://mini-zracer.com/forums/showthread.php?t=37169)

shaggy33 2011.10.20 04:22 AM

Autoscale options for MR03 and motor
 
Can I just check a couple of things!?

1. Can any Mini Z Body (except F1 of course) fit the MR03 chassis?

2 If you fit a Wide body do you need appropriate offset wheels or can you run with other wheels and they will just be set in the wheelarches more?

3. What is the next best motor up from stock that can be run with stock fets?

Thanks for help

kryten 2011.10.20 06:29 AM

1.yes it can
2.you can run narrower wheels set under the body.
3.you can run a stock R on stock fets,or any of the new atomic 17mm can motors.

shaggy33 2011.10.20 06:38 AM

Bodies for mr03
 
thank you kryten

unearthed name 2011.10.20 09:42 AM

Or you can use x-speed motor

chad508 2011.10.20 09:59 AM

i would say the pn 70 are the reflex 70 would be the next step up from stock.

EMU 2011.10.20 10:59 AM

Or the Atomic USA motor, which I think is 60t. ATM Stock-R is 44t, which is quite a big step up in power.

I have used just about every Mini-Z motor on stock fets. While I would recommend fets for a motor with turns less than the PN 39t, it is not really needed to use the motors. Long term use with low turn motors may slowly hurt the board...


All times are GMT -5. The time now is 04:19 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com