Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   Transmitters, Receivers and Crystals (http://mini-zracer.com/forums/forumdisplay.php?f=94)
-   -   4pk modification for mini-z 2.4g asf (http://mini-zracer.com/forums/showthread.php?t=30918)

CCL 2009.02.12 05:03 AM

4pk modification for mini-z 2.4g asf
 
Does any have experience to modify 4pk use for mini-z 2.4 g asf ?

mleemor60 2009.02.12 06:48 AM

Is the 4PK module based or is it dedicated Futaba 2.4 FAAST system? If it is module based I'm sure there is a way to adapt the 2.4 ASF module to it like the 3PK

CCL 2009.02.13 07:46 AM

Quote:

Originally Posted by mleemor60 (Post 335690)
Is the 4PK module based or is it dedicated Futaba 2.4 FAAST system? If it is module based I'm sure there is a way to adapt the 2.4 ASF module to it like the 3PK

It look no one try this modification

ruf 2009.02.13 01:10 PM

Dedicated. Would be a royal pita to mod it.

pchan0 2009.02.13 01:25 PM

Do you know how?

Quote:

Originally Posted by CCL (Post 335805)
It look no one try this modification


CCL 2009.02.15 08:27 AM

Quote:

Originally Posted by pchan0 (Post 335850)
Do you know how?

If someone have 4pk and willing to open it


Post picture for detail inside component and space

We may study the possibility to modify

MikeL 2009.02.15 08:00 PM

Why would you risk messing up a $500 radio for this..

CCL 2009.02.17 09:34 AM

Quote:

Originally Posted by MikeL (Post 336048)
Why would you risk messing up a $500 radio for this..

NO NEED to mess up ! Just Open and close by loosen some screw


We just want to study the possibility to integrate mini-z 2,4 g module into 4pk and made a switch to changeover the function

nusadua 2009.03.02 09:13 AM

You need only photo from board? from both sides?

herman 2009.03.02 09:48 PM

hmm... didn't pn make a module adapter for this???

http://www.pnracing.us/new/product_image/378_1.jpg
http://www.pnracing.us/new/product_image/378_2.jpg
http://www.pnracing.us/new/product_image/378_3.jpg

from
http://www.pnracing.us/new/product.p...d=378&img_no=3

picture shows this on a 3pk... don't know if it'll work on the 4pk though...
but if it's dedicated... i guess it would be a 'royal pita' to do as ruf said...

pchan0 2009.03.07 01:21 PM

CCL,

Is this from you?

http://www.youtube.com/watch?v=hQDzXXqGot8

Quote:

Originally Posted by CCL (Post 336175)
NO NEED to mess up ! Just Open and close by loosen some screw


We just want to study the possibility to integrate mini-z 2,4 g module into 4pk and made a switch to changeover the function


CCL 2009.03.07 09:50 PM

Quote:

Originally Posted by pchan0 (Post 338678)

NO

Finally , this modification work was done by Taiwan MINI_Z player.

Of course , CP value still need to be considered

Ha ! KO seem try to sell EX 10 forever.......

dabinn 2009.03.11 02:28 PM

Quote:

Originally Posted by CCL (Post 338730)
NO

Finally , this modification work was done by Taiwan MINI_Z player.

Of course , CP value still need to be considered

Ha ! KO seem try to sell EX 10 forever.......

CCL, I saw you post articles about Taiwan Mini-z. Are you a friend of CORN ?

CCL 2009.03.12 09:45 AM

Quote:

Originally Posted by dabinn (Post 339264)
CCL, I saw you post articles about Taiwan Mini-z. Are you a friend of CORN ?

Ha ! '
I knew you very well

gomez 2009.09.22 07:01 AM

Hello all,
i believe that 4PK will work with 2.4 ASF. I have a 3PJ ( previous to 3PK ) and it works , and its known to work with 3PK .
All you need is that PN racing adapter shown few posts before and the Ko-Propo Mini-Z module . Ko propo module goes on adapter and adapter on Transmitter. easy ! my dnano goes like that . Good Racing all !


All times are GMT -5. The time now is 10:29 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com