Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   KO PROPO (http://mini-zracer.com/forums/forumdisplay.php?f=141)
-   -   2.4GHz Tx Settings (http://mini-zracer.com/forums/showthread.php?t=30342)

KO PROPO Staff 2008.12.09 12:05 PM

2.4GHz Tx Settings
 
It has been brought to my attention that when using the 2.4GHz module you must have the following settings in your Tx.

1. Steering Travel Max 70
2. Steering Balance Max 70%
3. Throttle High Point Max 60
4. Throttle Brake Max 60
5. Quick ST & TH in the EX-1 UR cannot be used.

Setting your Tx above the max settings may cause the vehicle to operate incorrectly.

For example, recently we have ad a few customers say their car will not go into reverse. If the throttle settings are not set to the above settings, yes it will not go into reverse because the max endpoint settings for the ESC will get goofed-up. Some modules may get away with it, but most will not operate correctly.

Please check your settings. I have found that with the above settings, the cars do respond better.

mikey 2008.12.09 02:10 PM

as i switched over to 2.4, i set up a template for all those exact settings on my ex10.

although, now, i noticed that my F1 that is still AM isnt working correctly. lol.

Felix2010 2008.12.15 12:34 PM

Thank you
 
Thank you KO for posting this info. It appears to have resolved my "signal loss" and "glitching" problems I've been having (For now, let's hope it's permanent.:D )
If any other developments arise concerning the use of the RF901-SM 2.4ghz module for Mini-Z when used with the EX-10 Helios or the EX-1UR I would very much appreciate any and all updates.
Thanks again for your help!
- Lawrence

Darth_Hell 2009.01.17 10:32 AM

Ko Porpo
 
Hi, THANK YOU KO for the above... Currently my settings are all to the max!!! I thought if all is max, then my car will be also maxed out.

Yet to try out your recommendations... By the way, your recommendations are they relevant to all KO TX all around your productions? What i mean is different batches of electronics will differ slightly, so your recommendations are they fit for all KO TX???

KO PROPO Staff 2009.01.19 07:43 PM

Quote:

Originally Posted by Darth_Hell (Post 332129)
Hi, THANK YOU KO for the above... Currently my settings are all to the max!!! I thought if all is max, then my car will be also maxed out.

Yet to try out your recommendations... By the way, your recommendations are they relevant to all KO TX all around your productions? What i mean is different batches of electronics will differ slightly, so your recommendations are they fit for all KO TX???

The settings listed are for all KO Tx's that you want to use with the 2.4GHz Mini-Z.

Darth_Hell 2009.01.20 01:22 PM

Cheers KO!!!
 
Thanks so much... The information really help a lot!!! Maybe KO should print the info and should be accompanied with the kit!!!

2EZ 2009.01.20 02:39 PM

Does this apply to the Helios or just the the EX-1 UR ??
Thanks

hrdrvr 2009.01.20 05:07 PM

^ Its for the helios too 2EZ. Ive got a copy of it printed and waiting for you at the track for tommorrow :D

Quote:

Originally Posted by KO PROPO Staff (Post 332462)
The settings listed are for all KO Tx's that you want to use with the 2.4GHz Mini-Z.


tongho 2009.07.01 10:42 AM

Quote:

Originally Posted by KO PROPO Staff (Post 327454)
It has been brought to my attention that when using the 2.4GHz module you must have the following settings in your Tx.

1. Steering Travel Max 70
2. Steering Balance Max 70%
3. Throttle High Point Max 60
4. Throttle Brake Max 60
5. Quick ST & TH in the EX-1 UR cannot be used.

Setting your Tx above the max settings may cause the vehicle to operate incorrectly.

For example, recently we have ad a few customers say their car will not go into reverse. If the throttle settings are not set to the above settings, yes it will not go into reverse because the max endpoint settings for the ESC will get goofed-up. Some modules may get away with it, but most will not operate correctly.

Please check your settings. I have found that with the above settings, the cars do respond better.


All my 2.4 mini Zs works far more better now. Can go reverse like normal AM board mini Z. :)

lfisminiz 2009.12.03 08:34 PM

Mr-03 board
 
Do these setting apply to the MR-03 boards since there different than the MR-02 boards.


THANKS:)

KO PROPO Staff 2009.12.04 08:08 PM

Quote:

Originally Posted by lfisminiz (Post 368690)
Do these setting apply to the MR-03 boards since there different than the MR-02 boards.


THANKS:)

Tx settings do apply to the MR-03 as well.

lfisminiz 2009.12.04 08:51 PM

Thanks for both quick replies.

racer_18x 2010.01.20 11:48 AM

question for Ko Propo Staff
 
hi i've notice that everywhere has no stock on the rf 901sm module and ko has recently produce the new rf 902sm module. can this rf 902sm module work with the older tx eg. ex1 or ex1ur?

KO PROPO Staff 2010.01.21 11:09 AM

Quote:

Originally Posted by racer_18x (Post 373106)
hi i've notice that everywhere has no stock on the rf 901sm module and ko has recently produce the new rf 902sm module. can this rf 902sm module work with the older tx eg. ex1 or ex1ur?

The 901SM module has been out of stock for a while. They should be in stock once again by next week.

The 902SM will only work with the new EX-10 eurus.

racer_18x 2010.01.21 11:31 AM

so that means those other tx eg. m11 or 3pk wont be able to use the rf 902sm as well? cause the previous modules work on those tx with the usage of the pn converter


All times are GMT -5. The time now is 08:22 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com