ATOMIC RC World Race 2009
UPDATED: 1/21/09
Atomic RC and HKS Hobby present Atomic USA Mini-z World Cup 2009. See tentative rules below. Locations will be announced shortly. Rules/classes....etc are subject to periodic revisions. Class a. *2 Wheel Drive Stock (Atomic World Cup Series) / b. *4 Wheel Drive Stock (Atomic World Cup Series) / c. 2 Wheel Drive Open Stock / d. 2WD or 4WD Modified Open Class / e. Formula One Stock (Open) / * A main winner in 2WD & 4WD Stock Class ( Atomic World Cup Series) will qualify for the grand prize drawing of round trip air ticket plus hotel (3 lucky winners) for ‘2009 Atomic World Cup Final’ in Macau. Rules & Regulations a. 2WD Stock Battery : AAA NIMH only Body : Kyosho only Motor : Stock (hand out # MO-USA) Minimum Weight : 180g Min/Mix Wheel Base : 86-98mm Tires : Mini-Z type Touring Rubber (any brand) Remarks : Atomic hop-ups or Kyosho parts/hop-ups only b. AWD Stock Battery : AAA NIMH only Body : Kyosho only Motor : Stock (hand out # MO-USA) Minimum Weight : 190g Min/Mix Wheel Base : 90-98mm Tires : Mini-Z type Touring Rubber (any brand) Remarks : Atomic hop-ups or Kyosho parts/hop-ups only c. 2WD Open Stock Battery : AAA NIMH only Body : Kyosho only Motor : Stock (hand out # MO-USA) Minimum Weight : 180g Min/Mix Wheel Base : 86-98mm Tires : Mini-Z type Touring Rubber (any brand) Remarks : Any hop-ups d.2WD/AWD Modified Open (Subject to final revision) Battery : AAA NIMH only Body : Atomic (AR-125, AR-210, AWD204) & Kyosho Autoscale Motor : Any Atomic motor Minimum Weight : Open Min/Mix Wheel Base : 86 -98mm Tires : Mini-Z type Touring Rubber (any brand) Remarks : Any hop-ups c. Formula One Battery : AAA NIMH only Body : Kyosho F1 autoscale Motor : Stock (hand out # MO-USA) Minimum Weight : TBD Min/Mix Wheel Base : stock WB Tires : Kyosho Mini-Z F1 or Atomic F1 Wheels/Tires only. Remarks : Any hop-ups Remarks: - Each class has 3 qualify runs of 6 minutes and a final run of 14 minutes. (Subject to revision) - All classes (except 2WD/AWD Modified Open) will run on ‘ATOMIC’ controlled hand out motor only. Further modification is NOT ALLOWED. Additional motor may be available from race director at racer’s expenses. - 2WD/AWD Modified Open Class accepts any motor from any manufacturer. No hand out motor will be provided. - Formula-one Class will run on ‘Kyosho Auto Scale’ formula-one body only. - ESC & Receiver limited to Atomic or Kyosho PCB Board with the exception of ‘2WD/AWD Modified Class -No traction compound or wet tires on track |
Thank you for the information.
Is the chassis restricted to Kyosho chassis, or can we use any chassis that is the same scale? (MRCG, P28, Pro-Z, Iwaver, home made) I see that the electronics are limited to Kyosho for the stock classes, but are the chassis limited as well? Can you use the Kyosho electronics on a different chassis? I just want to get this cleared up before I try to decide what classes I would run. Thank you, Eugene |
where are the events going to be held,need to go racing
|
yes when & where. eugene-are you planning on running an Iwaiver chassis???????:eek::eek:;) -j
|
hey Frank whats up man?:D -j
|
All questions will be answered after I confirm with Atomic HQ in Hong Kong.
|
Thank you, I look forward to the Atomic Race series. I have been using the Race USA Motor for a little while, and like it better than last years motor.
|
Sounds like a cool race.
I will deff. be attending!! Cody |
GF Racing will be there....:cool:
|
might try my best to make this as well - depending on location and time ;)
|
I am very excited about this!
i need to learn so much to be ready for this, and if it is realtively close. maybe ill make a vacation with my wife for the weekend. BTW, what class from previous experience do you guys feels is the "Most fun" Would it be stock? since evenone has the same chassis and motors? |
interesting...
|
I would love to be able to attend, but Ill have to wait and see when and where it is :D
I have a question though, why is it that with these manufacturers (PN does it too) a stock Kyosho car has to have weight added to it for stock class? My 2wd stock car weighs in at around 172g without any weight eliminated, and my AWD stock car weighs in around 181g, also without any weight dropping modifications. In fact Ive added weight to both if them in the form of alloy and bearings, and I still have to add almost 10g to be legal. Id just like to know what the thought process is behind this, so I can better understand the ruling. |
ive never weighted my car.. but that it inteteresting.
I have a question on the ground of a handout motor, would a HO-motor run faster, slower or the same in an MR02 compared to an AWD keep in mind that the AWD has more things to rotate right? - my experience tells me it would be slower in the AWD. I ask this wondering is it would the same spec motor handed for both stock classes |
These rules are to make it a level playing field. I personally think min weigh in should be 175g for MR02, but I dont make the rules. On the larger, heavier bodies, they are very close to 180 (if not above it), with a stock chassis. The unpainted bodies seem to be considerably lighter. I would say that the average weight of a chassis is around 95g, then the body is about 35g, and batteries about 48g... So average is slightly under 180g.
I guess that the organizers of the races feel that everyone should have the same weight starting point. Whether they want to choose alloy parts to increase their weight, or if they want to choose other things that they can ballast their weight with. I dont mind adding weight, as you can really fine tune the car to the tire setup that you have... But it does take away the advantages of a lighter chassis. At the same time, a very light car will get bonced around much more easily in a collision. If you dont like the weight rule, run on the open mod class, where there is no minimum weight ;) |
All times are GMT -5. The time now is 04:18 AM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com