PN Racing Bluetooth ICS Adapter
i'm looking at finally picking up an adapter provided i can find a cheap android phone just to use it for this.
does the android app provide the same options as the PC adapter? |
Yes same options
|
great, thanks for the confirmation. now i just need to find a cheap android phone/device with a comfortable size screen to keep in the pitbox.
|
Is the app out for Android version? Thought Kenon said comming in March.
|
march is right around the corner. there are andoid apps already for use with the gogolap adapter
what is the min. bluetooth version needed? there are some cheap small tablets with v3.0 |
Get a first gen Nexus 7.
|
I have an android phone with Bluetooth that I'm not using. I'm interested in this as well.
|
I've used my galaxy S3 with the app available from the google shop. search for Mini-Z ICS and get the appropriate version. I've used it and it's works fine. has all the same options at the other ICS PC versions I've used.
I do get an unable to write message, but the setting do seem to get written to the board and function the same as when I use the PC with the flipside ICS software. |
Quote:
|
i found a nexus 7 for under $35 so now it's just a waiting game to see if it actually arrives and working.
|
Quote:
I'm working on a home brew BT interface, cost of 6 bucks. |
i hope so... took a gamble on what seemed like a china auction site.
|
Haahaa, if anything I'd say you bought a chinese clone of a Nexus 7.
Got my homebrew BT programmer working this afternoon, tested with mr03 and mr03ve so far, no errors reading or writing. |
as long as it works, for the money i won't care.:p
|
Quote:
|
Quote:
http://mini-zracer.com/forums/showthread.php?p=450350 |
1 Attachment(s)
I can not read or write. I get this error message from the app.
|
Apparently the PN board can only read/write with PN's ICS software. The android app only works for kyosho PCBs.
I bought a bluetooth adapter for my PC, connected to the PN bluetooth adapter, and was able to read/write normally using the PN ICS 1.0 software. |
As far as i know, the Android app is being worked on to use this.
|
ok... fyi the android software for miniz and ve is made by a awesome miniz enthusiast in japan and not made specifically for pnracings Bluetooth adapter
and we appreciate his efforts in introducing this tooling in to the miniz world the pnracing android software is coming soon... the pnracing Bluetooth adapter works flawlessly on the pnracing electronics when connected to a Bluetooth equipped laptop for the current android software we have found THE solution to the ERROR PROBLEM please remove the white wire from the plug entirely, just cut it out... it is a secondary write wire that is unnecessary for the miniz and apparently it is unnecessary for the pn software as well:) |
Quote:
|
Quote:
|
just to confirm, I pulled the white wire from the plug and I'm not getting the write error message any longer, I get a "write ok" message now.
thanks for posting that info Grant. |
Quote:
|
hello everyone..
I bought today this adapter and I get the same error message .. I use a standard MR03 short, so the only thing I need to do is to cut away the white wire from my PN Bluetooth adapter, so will it work then? uses android app MiniZ ICS BT1.5 |
Quote:
I did this and mine works without issue. |
Quote:
|
well now i have tried once again, i removed the white wire and did a new try, BUT i still get the same error message..
ICS Failure board size error. docent matter what i do, it's just the same message over and over again, i did try on a different car also but still the same error message.. i use Kyosho MR03 board with the PN ICS adapter and it dosen't work at all.. can someone please tell me what i'am doing wrong here?? when i start the program and sets the power to the car, the Green led comes on, and when i am making my new profil and want to save it, the error message comes. // Hasse |
Try this. Plug in the adapter while the car is off. While pushing down on the pairing button, turn car on. Then start up the program and do a read. Make sure that the correct model is selected, then make changes and do a write.
|
Quote:
i will try that, thanks for the advise |
WELL
now it works GREAT,, thank you for the advice KWT :) |
Glad it worked out for you.
|
This is all new to me. What kind of things do you change?
|
Does anyone knows if works with dNaNo?
|
Quote:
Kris |
You can change the steering feel, how the motor reacts, torque, neutral dead zone. backup delays and on brushless motors, the top speed.
|
All times are GMT -5. The time now is 04:43 AM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com