Mini-ZRacer.com Forums

Mini-ZRacer.com Forums (http://mini-zracer.com/forums/index.php)
-   GL Racing (http://mini-zracer.com/forums/forumdisplay.php?f=239)
-   -   GL Racing Ferrari 488 and Lamborghini Huracan (http://mini-zracer.com/forums/showthread.php?t=43456)

soulstice 2021.09.22 10:15 PM

GL Racing Ferrari 488 and Lamborghini Huracan
 
Anyone have experience with these? They're look great but on the fence because they're unlicensed and pretty spendy at that as well.

SuperFly 2021.09.23 01:19 AM

I have two of the Huracans (orange/green and yellow/black) and three of the Ferraris(red, black, and white with red and blue). Quality is decent. If typical Autoscale is a 100, these are 85-90. I've heard the blue Huracan should be avoided, poor quality decal wrap. That's the one I don't have.

I haven't driven any of them yet. Also, they only come with show wheels.

arch2b 2021.09.23 07:44 PM

I have them all. based on quality, no they are not worth the $70 price tag. Are you in the market for +3/+3 Huracan? Then you really have no other choice. Are you in the market for +3/+3 Ferrari? Then you really have no other choice. I bought them but i'm bitter about it and completely honest about that.

The plastic mold is not as sharp and crisp as Kyosho or the prior R8 from GL. The decals are not perfect. Certainly not Autoscale quality. it's not much to complain about and from a 12" away, you can't tell. Yes, the 488 wheel arches are larger than needed but not a deal breaker in my opinion.

SuperFly 2021.09.25 04:00 PM

Arch2b nailed it. Not worth $70, but what are ya gonna do if you need a wide offset 98mm GT car that isn't one of the usual suspects?

It's closer in feel to a really detailed lexan body, like some of the ones I've seen on 1/10 scale drift cars

TPDazzle 2021.11.01 08:53 AM

I like that they made some nice race-livery bodies that kyosho doesn't make, but the price was too much for me to pull the trigger. I came very close on the red Ferrari. I have a GL white body R8 that I will paint up at some point. I hope they release the other 2 in white body kits as well.

Rooster29 2021.12.30 04:32 PM

What are the front and rear wheel offsets for the Ferrari and Lamborghini GL bodies on RWD chassis? I havenít tried GL bodies and wouldnít mind giving them a go since Kyosho isnít an option for these bodies.

arch2b 2021.12.31 12:08 PM

I run +2.5f/+3r and no issues at all on the 488. I suspect +3/+3 would be fine and fit both the 488 and Lambo.

Rooster29 2021.12.31 04:18 PM

Quote:

Originally Posted by arch2b (Post 480860)
I run +2.5f/+3r and no issues at all on the 488. I suspect +3/+3 would be fine and fit both the 488 and Lambo.

Great! Appreciate the information ;)


All times are GMT -5. The time now is 06:59 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com