View Single Post
Old 2002.10.16, 12:02 PM   #4
Russ
Super Moderator
 
Russ's Avatar
 
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 1,448
Send a message via AIM to Russ
How does the turbo know when to send power to the motor? From the original motor leads. That's why every turbo has 2 wires that screw down to the ESC in place of the old motor wires. A turbo will stop the original FETs from frying in the first place, but if a FET is burned, that corresponding motor lead will be dead... so it will not send any signal, and the turbo won't send any signal.
__________________
Russ

--------------------------------------------
Russ is offline