View Single Post
Old 2009.07.01, 10:42 AM   #9
tongho
Registered User
 
Join Date: Nov 2008
Posts: 15
Quote:
Originally Posted by KO PROPO Staff View Post
It has been brought to my attention that when using the 2.4GHz module you must have the following settings in your Tx.

1. Steering Travel Max 70
2. Steering Balance Max 70%
3. Throttle High Point Max 60
4. Throttle Brake Max 60
5. Quick ST & TH in the EX-1 UR cannot be used.

Setting your Tx above the max settings may cause the vehicle to operate incorrectly.

For example, recently we have ad a few customers say their car will not go into reverse. If the throttle settings are not set to the above settings, yes it will not go into reverse because the max endpoint settings for the ESC will get goofed-up. Some modules may get away with it, but most will not operate correctly.

Please check your settings. I have found that with the above settings, the cars do respond better.

All my 2.4 mini Zs works far more better now. Can go reverse like normal AM board mini Z.
__________________
Mini Z AWD 2.4 Ghz
Mini Z F1 2.4Ghz
Mini Z Monster 2.4 Ghz
tongho is offline   Reply With Quote