View Single Post
Old 2010.01.20, 11:54 AM   #8
racer_18x
Registered User
 
Join Date: Dec 2009
Posts: 21
Quote:
Originally Posted by briankstan View Post
channel 3 is the worst. other channels can have it as well. What is the placement of the loop? is there any large metal objects around it, doors, something in the floor, etc.

I also notice that you get more interference with the stock TX then you would with say a Helios or M8 or other High end TX's. they have a stronger more clear signal.

well the loop is place at a very slow corner so that we wont miss any laps and very close to the drive stand as well to reduce the glitches...as for the floor i'm on the 3rd storey of the building so maybe there is some beams underneath but i laid carpet in between the floor and the loop.

drivers using the highend tx still do get glitches at times but i've never check wat freq they are on...will advice them to switch to those special crystals when they play again.

but a question to you pros any way to reduce rf interference from the building structure? eg doors and building beams..etc
racer_18x is offline   Reply With Quote