Thread: Eurus
View Single Post
Old 2014.01.26, 11:16 PM   #23
Garug
Registered User
 
Garug's Avatar
 
Join Date: Jan 2012
Location: Finland
Posts: 55
Though throttle sub trim should do the same job, you could still try to use the throttle trim as follows. First centre the sub trim.

Highpoint 85, break 30 all other throttle settings default. Set throttle trim so that the wheels just start to spin forward, now count the clicks and set the throttle trim so that the wheels start to spin backwards. Divide that by 2 and apply that amount of clicks forward. Now the neutral is centred.

If this does not help, then the problem is likely the ICS settings or broken electronics on the car. If I remember correctly there is a break delay setting
on ICS, set that to minimum. You could also try the neutral range to medium.

I hope this helps.

BTW. I do not like mush the Eurus user manual, but K.I.Y user manual is very good and helpful also for Eurus. The K.I.Y manual explains well how the different settings affect the handling of the car.
Garug is offline   Reply With Quote