How to change the play between Spur gear and pinion gear on F1 ?
Hi F1-Racers,
to get the optimal gap/play between the Spur Gear and the pinion Gear normally in RC-Cars the best way is to use two screws to adjust it exactly.
As all knows the F1 has just 2 black plastic pieces that can be installed in 3 different ways to use pinions between 6-9.
Question:
Does someone did manage to adjust this or has an idea how this can be done?
I guess a change of just 0,2mm .. 0,6mm is enough!
Play is a little too much on my F1!
High noice and performance loss is the result.
Last edited by Bandie; 2005.01.16 at 08:01 AM.
|