Quote:
Originally Posted by banquer
I don't understand. Can you explain it?
No.
You must disconnect the led to do the 901SM more thickness and can be inserted into the 4PK more easy.
The paring switch are the green and red wires in the left side of the 4PK. To put 901SM into paring mode, you must to plug the pin, wait five secods, and unplug it.
Regards.
|
Hi:
thank you for your vulable information to modify the 4pk to suit mini z system
however i have two things need your help.
1) you mean disconnect the led, it means the led should be taken out from the 901sm pcb board?
2) During paring with the mini z car, Should i need to hold the pairing button
on the car PCB board and at the same time connect the pin on the 4pk for five seconds and then disconnect it
it would be appreciated if you can help me clarify these two things
thanks one more time