Quote:
Originally Posted by r46
when i get mine an go about brushless conversion, i'll be using ezrun 18a, 12x30mm can an hopefully turnigy coreless servo 0.07s @4.8v or 0.05s @6v
|
If you have the Corona CS/DS-919MG, I don't know why you would want to change it to a Turnigy. In my own experience, the cheaper Turnigy and HK servos don't centre well, but I have not had any problems with Corona servos taking a beating in 1/24 and 1/18 trucks and they come back to centre well. The 919 is plenty fast enough IMO and for high-traction on-road conditions, having a steering response too fast will put you on your lid!