Alright guys, new motor, new problem. I just got a PN 3500 stock motor to my brushless car HFAY legal with the motor rule changes. I disconnected my 5500 one wire at a time and soldered on the new motor, and it runs backwards! I double checked the VEpro board, and everything matches up. I tried removing all the solder with some solder braid in case I bridged a tab, and then I resoldered it after triple checking that the motor matches the board, and it still runs backwards. I reversed the throttle on my EX6r radio and it runs forward, but goes slow and runs in reverse much faster, so that didn't work out. Any ideas about what I screwed up?
https://photos.app.goo.gl/tCAi6DekeUxnDAVb6e Also, I seem to struggle with getting my photos to appear in my message, is their a tutorial on that somewhere? Thanks for the help!