Normal caster settings will not cause any interference, i.e. the caster settings that are possible with PN MR3051WS or with similar upper tower bars, but extreme caster settings that are possible with Reflex racing upper tower bar will cause interference if bigger arm magnets are used.
Cambered knuckles can can be used as normally, but if one really wants to use the maximum caster Reflex upper tower bar can provide and bigger magnets, the chassis could be lightly modified where the bigger magnets would touch it, but we have not seen any need for such high caster settings.
Note: the lower arm measurements affect also both caster and camber. we have been testing with PN MR3052WS lower arm and similarly measured Atomic lower arm.
Last edited by Garug; 2013.08.10 at 04:15 PM.
|