Quote:
Originally Posted by ruf
The receiver is the new KO Propo 2.4GHz. I cut the pins off of channels 3 and 4 and trimmed the case down around those channel sockets. I used electrical tape to "reseal" the case. I also shortened the servo and ESC connector plugs.
As for the antenna, I matched the length to the ASF boards in the Mini-Z at 30mm. So far, no reception issues at all. The ESC is an Xray.
I'll see what I can do about the magazines.
|
Joe,
Which of the X-ray speed controls is it? 180,300 or the 300R