updated rules for boxstock class
update 2.0
I am going back to the way the rules we did at Hobbytown tom river NJ in box-stock class. after buying a new box stock car this gives them an option to there set up
Kyosho BoxStock Class
Brush or brushless car Kit are allowed
Kyosho chassis, no modifications
Stock electronics, stock FETS
Stock motors & PN 70t motors or any 3500kv brushless (PN,GL
TECH- 70 turn needs to have a 9 tooth pinion
3500kv motor can have a 10 tooth pinion
but you need to have the Kyosho stock gear diff
AAA rechargeable NiMH only
Kyosho bodies, (white bodies with paint or stickers are OK)
3d print wings are ok
Aftermarket front body mounts and reinforcements are OK
Kyosho tires or PN tires only
T-plate open
Front springs open
94 & 98mm bodies that can't fit the LM or MM2 mount can run a PN Multi Length Disk Damper with soft springs only
86 & 90mm bodies are open disk damper with stock motor mounts
Bearings are encouraged
Wheels can be replaced with similar offsets
Metal wheel nuts are encouraged
Aftermarket servo gears are OK
__________________
Atomic Team Driver
FAST by FAQISH
Last edited by tommy_greeneyes; 2019.06.14 at 02:27 PM.
|