Thread: The New MRCG1.1
View Single Post
Old 2009.07.10, 10:23 AM   #8
Davey G
Need a mini z Painted????
 
Davey G's Avatar
 
Join Date: Nov 2006
Posts: 1,569
Send a message via MSN to Davey G
I have been testing the MRCG1.1 extensively the past few weeks and here is my current setup:

FRONT:

PN Yellow springs, .010 shim under knuckle, .010 shim on top of bumpstop
Kyosho 3.5mm bumpstop, PN 2deg knuckles, Ruby Lube for Dampening, tie rod centered for 0 degree toe, 2mm offset PN 20mm rims.

REAR:

Axle all the way up (low ride height) steel diff axle, my own central pivot (see pics) rear pod plate is level with main chassis at ride height, stock flex plates, low CG flex plate position, red springs on top and bottom of DPS, very little preload on DPS springs, Ruby Lube for dampening, Kyosho center shock (50wt oil) with Kyosho black spring, 2mm offset PN 20mm rims.

MISC:
54-12 gearing to move the motor forward
stand alone electronics decased
Futaba servo as suggested by Greyscale racing

Central pivot using a 4-40 grub screw and a sharpened 2mmscrew:




__________________
Dave Graboski
DG Designs
www f******k com/dgraboskidesigns

Custom Paint, Custom Stickers, Wraps, Pitboards, Graphic Design

TEAM DRIVER FOR: PN RACING, TRP, TEAM SCREAM, DG DESIGNS
Davey G is offline   Reply With Quote