View Single Post
Old 2017.03.10, 09:59 AM   #6
Traveler
of both Time and Space
 
Traveler's Avatar
 
Join Date: Apr 2008
Location: Winston-Salem, NC
Posts: 1,854
Quote:
Originally Posted by Mike Keely View Post
If you keep the same amount of shims on both sides it should have the same amount of camber on both sides.
That is the problem! To get the same camber, I need to shim more on one side.

Quote:
Originally Posted by Mike Keely View Post
It is the length from the pivot pin to the kingpin ball.
That is what I wanted to know. I put a 0 deg and 2 deg arm side by side and it was hard to see, but the 0 deg arm was a little longer from pin to ball than the 2 deg arm.

Guessing one of the 2 deg arms I have has a little more bend in it than the other. Wonder if there is an easy way to measure that and get them equal, instead of installing them on a car and shimming them equally.

Wonder if I can somehow use the Reflex Racing camber key tool to compare them.

Quote:
Originally Posted by Mike Keely View Post
Hope this helps.
Thanks for your help!
Traveler is offline   Reply With Quote