View Single Post
Old 2017.09.23, 07:39 PM   #36
TeeSquared
Redline
 
Join Date: Aug 2012
Location: Greater Vancouver, B.C.
Posts: 218
As a word of caution, be sure not to set the steering end point too high, as over driving the servo can burn the motor out. I.E on your radio, never set the steering end point above 70%. You can check if it's set too high by turning the wheel on the transmitter all the way in either direction. If you hear the servo motor buzzing continuously at the limit, it's probably set too high.
TeeSquared is offline   Reply With Quote