View Single Post
Old 2011.10.01, 04:06 PM   #2
pinwc4
Registered User
 
pinwc4's Avatar
 
Join Date: Aug 2005
Posts: 913
Flip Side Racing software does work with the I-Lap latest hardware and the 7 digit ID's. All that should be necessary for configuring the software is selecting the correct COM port. When setting up new racers you click Create New Racer and then the Scan button and drive a car under the bridge. If everything is working correctly the 7 digit UID will be automatically entered in the field on the left.

The software does not work with the 1st generation I-Lap lap counting hardware. Also if you have the 1st generation lap counter it does not work with the newer transponders with the 7 digit UID's. The 1st gen I-lap system only worked with transponders numbered 1-10. I think if your lap counter is a USB based system you have the newer generation lap counter.

If your lap counter has a Serial plug instead of USB (or a Serial plug with a USB adapter) then you have the 1st generation lap counter and it will not work with Flip Side and it also will not work with the newer transponders from I-Lap.
pinwc4 is offline   Reply With Quote