Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2006.10.24, 08:17 PM   #1
cowboysir
epic procrastinator
 
Join Date: Jul 2006
Location: Whistler, B.C.
Posts: 2,141
1/25th xmod "GTO DRIFT"

So, I got bored a couple weeks ago and thought to myslef "I should try making a brushless xmod!". Since there has been other creations I've seen around I decided to fabricate my own version...I think the overall design is a good one. Besides the use of an almost full GPM gen 1 xmod package I designed my own lower and upper chassis plates to mount the various componentry for the brushless esc/Rx/li-po's. I used an e-Flite 2 cell pack for the power supply and an RC18 motor mount for the Mamba mounting.

In the grand scheme of things, I just created this project to see if it could be done...during various tests I could not keep the parts together or keep the wheels on the axles. It didn't matter what loctite or how many new locknuts I used, the power of the Mamba was too much for it even at 50% throttle.

I hope you enjoy the pics...Thanks for looking.
Attached Images
File Type: jpg mambagoat3 001.jpg (172.4 KB, 148 views)
File Type: jpg mambagoat3 002.jpg (176.1 KB, 117 views)
File Type: jpg mambagoat2 004.jpg (166.6 KB, 116 views)
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?

my custom body album (now that Photobucket sucks!)
http://mini-zracer.com/forums/album.php?albumid=192
cowboysir is offline   Reply With Quote
Old 2006.10.24, 08:42 PM   #2
Roketmini
The C is Missing.
 
Roketmini's Avatar
 
Join Date: May 2005
Location: Chicagoland
Posts: 386
Send a message via AIM to Roketmini
That is amazing...

It's a shame that it falls apart as speed, you could probably set a few records for smalelst and fastest.
__________________
Support your LHS
Roketmini is offline   Reply With Quote
Old 2006.10.24, 09:45 PM   #3
ChattavegasSE
Zoom Zoom!
 
Join Date: Aug 2004
Location: Chattanooga, TN
Posts: 1,144
Send a message via AIM to ChattavegasSE
Maybe try alloy wheels and regular steel/nylon lock nuts instead of those plastic XMods nuts. Gotta bullet-proof everything with that kinda power!
__________________
I got nothing.
ChattavegasSE is offline   Reply With Quote
Old 2006.10.24, 11:38 PM   #4
alpha_003
Registered User
 
Join Date: Jan 2006
Posts: 39
that is pretty amazing, i magine the speed that would have gotten if it could deliver it's power to the ground. i have thought about putting a brushless system in an xmod but the results were too scary to become true.
but somewhere they could be placed are the new micro-t, the mini-t's little brother....i think a micro-t is capable of wistaining the amount of force the mamaba system makes, of course, it would take a complete alloy drivetrain but it would be fast as hell.

-Lino
alpha_003 is offline   Reply With Quote
Old 2006.10.25, 01:58 AM   #5
byebye
Moderator
 
byebye's Avatar
 
Join Date: Dec 2003
Location: Springfield, Va
Posts: 5,996
thats pretty awesome! Good job! There have been a couple tries at it but I don't think I ever saw anything successful. Can you give us a basic parts list?

-Byebye
byebye is offline   Reply With Quote
Old 2006.10.25, 02:07 AM   #6
HammerZ
Master of Thrash
 
HammerZ's Avatar
 
Join Date: Oct 2002
Location: Arkansas
Posts: 4,980
Send a message via MSN to HammerZ
Those GPM parts are a must to get that driveline to run true. I know at least that much. My gen wun Xmods is close to stock other than those, those parts are a big improvement over the twisted stock plastic pieces.
__________________
HammerZ is offline   Reply With Quote
Old 2006.10.25, 10:17 PM   #7
cowboysir
epic procrastinator
 
Join Date: Jul 2006
Location: Whistler, B.C.
Posts: 2,141
Thanks for your comments guys...I've really enjoyed the build up of this little beast.

It sits now just as a rolling chassis since I wanted to get the electronics and motor back on my RC18T. I might build up this puppy with standard brushed electronics but it'll involve some scrounging/saving of funds. I see a micro Spectrum Rx, Novak Spy and modded 180 motor on my Christmas list...

As for the Micro-T I can't wait to get mine(I'm on the wait list at my LHS)! I envison a Feigeo 12mm brushless fitting really nicely and some minor electronics swapping...all in the effort to get 20mph out of a 1/36th!!!!!!
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?

my custom body album (now that Photobucket sucks!)
http://mini-zracer.com/forums/album.php?albumid=192
cowboysir is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Xmod help helee4 Mini-Z AWD MA-010, MA-015 6 2006.11.29 02:05 PM
XMOD Evo F-150 For SALE! Sky Miscellaneous Discussion 0 2006.11.15 10:14 PM
Newbie Review of Mini-Z vs XMOD vs XMOD EVO bemoore Beginner Questions 6 2005.12.14 03:48 PM
Iwaver Mini-Z Xmod my opinion cherokee iWaver 19 2004.11.10 04:31 PM
Xmod Turning TNB Mini RC 8 2004.06.10 01:32 PM


All times are GMT -5. The time now is 08:56 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts