Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2008.01.05, 05:15 PM   #1
wes
Z racer
 
wes's Avatar
 
Join Date: Apr 2007
Location: Toronto
Posts: 187
Parts Requests

Just a couple things I had in mind, feel free to add to this thread, or if you think some of the parts aren't needed...

The first thing I had in mind is a thicker upper deck, with stronger rear section where the body posts attach. My rear body posts flex a lot because it's a tiny piece of carbon fibre that holds them (maybe make it wider?) I've tried moving the body posts to the front position, but then it's a pain to take the battery pack out of the car. If you create a new upper deck for the new disc damper, maybe add this into the design?

The second is somehow to redesign the servo saver/steering mechanism so that the servo horn doesn't hit the upper suspension plate (right now my front end is all shimmed). Also the hex nuts on the servo saver seem to come loose all the time. I just feel the steering mechanism could be smoother without the threaded tie rod.

Lastly, I find a little bit of flex in the lower chassis between the servo and battery where the chassis gets narrow. I have yet to break a chassis, so I'm not too worried.

These are just my personal suggestions... I'm sure there are plenty of reasons to disagree I really hope more people contribute their thoughts about the Sinister... It's how racers and customers can help develop a better car! Thanks!

-wes
__________________
[COLOR=Yellow][FONT=Comic Sans MS
wes is offline   Reply With Quote
Old 2008.01.07, 10:44 AM   #2
Wolf
Registered User
 
Wolf's Avatar
 
Join Date: Feb 2004
Location: ISTANBUL/TURKEY
Posts: 138
Thanks a lot for your comments.

In fact we have not many reasons to disagree

As you might observed we are company which is in continues progress for improvement. With each batch we are adding new features and small touches to our products without interfering current customers.

For example the point you've mentioned about the chasis already revised and we have a little thicker places around servo now.

Or we have started to release new steering systems with a locknut, instead of a nut.

Or after we get questions about steering assmebly we've immediately prepared and article and posted.

This doesn't mean that we have reached ultimate position but at least we are listening and working on every single feedback.

We are working on a total new differential and sterring system and hopefully they will be released with messe.

Meanwhile the point you've mentioned about rear posts mentioned first and we'll see what we can do about it.

Thanks again for your comments and feedback

Regards

Ozan TERCAN
__________________
Sinister
Wolf is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
GPM Parts For Mini-z Monster arch2b Mini-Z Monster MM-01 35 2008.01.16 10:53 AM
Mini-ZRacer.com Parts Requests mini-z Parts and Hop-ups 162 2005.10.09 01:45 AM
GPM Mini-Z Monster Parts Requests mini-z Miscellaneous Discussion 30 2004.07.01 11:36 PM
MiniZRacer.com Parts Requests (Serious) ScottMcLeod Parts and Hop-ups 7 2002.11.24 10:28 PM
Identical Parts - everywhere! MetaOrbit Miscellaneous Discussion 13 2002.02.23 12:11 PM


All times are GMT -5. The time now is 03:45 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts