Converting front track of 015 to 02

[babstar]

Hi guys,

I was wondering what parts are needed from PN to convert the front track of a 015 to 02. I found this and that shoudl do the trick:

Conversionkit

but is it compatible with this:

PN Stablizerset


I would like to use stablizers on my 015 aswell.

Anybody gone this route befor?

Thx.

[Cherub1m]

Originally Posted by babstar

Hi guys,

I was wondering what parts are needed from PN to convert the front track of a 015 to 02. I found this and that shoudl do the trick:

Conversionkit

but is it compatible with this:

PN Stablizerset


I would like to use stablizers on my 015 aswell.

Anybody gone this route befor?

Thx.

That tower bar from PN is for the MR02 not the MR015. Basically if you want to run narrow MR015 bodies on the MR02, you need to use this conversion bar. This bar will not work for the MR015 chassis because the mounting holes will not fit. I have two sets of those tower bars mounted on two of my 90mm MR02's.

You may want to go with the EMU tower bar. EMU's tower bar is made for the MR015 and it give you the same front end width has the MR02.

[babstar]

Originally Posted by Cherub1m

That tower bar from PN is for the MR02 not the MR015. Basically if you want to run narrow MR015 bodies on the MR02, you need to use this conversion bar. This bar will not work for the MR015 chassis because the mounting holes will not fit. I have two sets of those tower bars mounted on two of my 90mm MR02's.

You may want to go with the EMU tower bar. EMU's tower bar is made for the MR015 and it give you the same front end width has the MR02.

Great advice thank you very much. almost bought it for nothing! Don't know that brand EMU, will go look for it.

Is there a 015-specific stablizer set on the market? or can one use the 02 type?

[cowboysir]

EMU is a member here at the site and his tower set is available here at tinyrc (almost positive).

When EMU first came out with his tower design I was one of the first members to purchase it and I'm happy to report that with his creation, proper setup and a nice low slung body i get no traction roll any more and close to comparible lap times to my similarly powered MR02's.

It really is a tremendous product.

[babstar]

Originally Posted by cowboysir

EMU is a member here at the site and his tower set is available here at tinyrc (almost positive).

When EMU first came out with his tower design I was one of the first members to purchase it and I'm happy to report that with his creation, proper setup and a nice low slung body i get no traction roll any more and close to comparible lap times to my similarly powered MR02's.

It really is a tremendous product.

Great tip! looks and sound excellent. Thanx again for the help. Looks like I might even be able to fit a stablizer bar on it if needed.

[EMU]

Babstar,

You can find the product available in the shop here or at Reflex Racing. You only need an MR02 tie rod to complete the build.

Here is the original MR015 tower thread... http://mini-zracer.com/forums/showthread.php?t=31792

The front end geometry becomes identical to the PN .5d caster MR02 front end. You may use existing stabilizer/roll bar available for the MR02.

Hope this helps,
Tot ziens

[Davey G]

If you want to run a MR015 at the MR02 width, the EMU setup is the way to go!!!

[JuniorWKR]

yup... i have 4 of them.... great rotation...

[babstar]

Good stuff guys, thx. I will be ordering one soon