Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts

Go Back   Mini-ZRacer.com Forums > Manufacturers > PN Racing

Reply
 
Thread Tools Rate Thread Display Modes
Old 2016.03.20, 11:38 PM   #1
BNR32rwd
Registered User
 
Join Date: Mar 2016
Posts: 1
What offset wheel and size tire to get? And other questions lol

Hey guys new guy here!

So I recently just bought my first mini z and I absolutely love it! But I'm a typical car guy and can't leave anything alone. I've already ordered many mods for her already but I love the flush look of a wide wheel and tire. So I bought a mr-03s 2wd rm( narrow) skyline r32. So my question is which size offset will fit on my r32 body to sit flush. Also what size tire for the wheels and what type of tire for mostly hardwood floor in my house. I'm not going to compete or anything just a fun lil hobbie for around the house!

Just in case I'm confusing here's my list of questions...

What wheel size/offset
What size tire/ type of tire ( for hardwood floors )
What degree of camber for steering knuckles and tierod


This is what I can remember off the top of my head for now, but please any other suggestions for mods or anything like that please feel free to put down!

Thanks again I hope to be an active member on this site!
BNR32rwd is offline   Reply With Quote
Old 2016.03.22, 08:29 AM   #2
cowboysir
epic procrastinator
 
Join Date: Jul 2006
Location: Whistler, B.C.
Posts: 2,130
When I ran an R32 for racing I had +1 offset all four corners so you'd likely be able to get +1.5 to sit flush. You will likely effect performance by doing so though. ...when the suspension compresses it will pinch the tire against the body and stop that wheel usually causing a spin.

Tires for mini z aren't made to be a real performer on hardwood so whatever you buy will work as long as you keep them clean and free of dust.

Camber and tie rods are again a performance thing. Alloy knuckles will probably be one of your first upgrades after you break the stock ones bumping into furniture (been there...). 1 degrees is a standard but if you're looking for more of a street racer look you might consider 2 degree or more. You will make it look cool but it really doesn't help much.
__________________
Proud to be GSR.

I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
cowboysir is online now   Reply With Quote
Old 2016.03.22, 10:58 AM   #3
Kevinmueller
Bavarian Bullet
 
Join Date: Feb 2014
Posts: 34
I agree with cowboysir. Another thing to remember is that the body prevents the wheels from hitting objects. If you use a larger rim off set the wheels will stick out more from the body (especially when the wheels are turned). This usually means you will damaging either your suspension (usually the knuckles) or a servo gear when you hit a wall or other object.
Kevinmueller is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:05 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts