Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2017.10.17, 10:22 PM   #16
SuperFly
bitPimp
 
SuperFly's Avatar
 
Join Date: May 2004
Location: Portland, Oregon
Posts: 337
Send a message via AIM to SuperFly
Here's the diagram I used, and it was accurate:



I was upgrading from a 27AM MR02, so I had to add a third wire to the steering pot, and I read that because the MR02 had one less servo gear I would need to switch the polarity of the steering motor, but that turned out to not be true. No biggie, just reversed it with the controller.

I considered eliminating the power switch, as I assume one could just jump those two pads and remove the switch. I kept the switch in place to not change too many variables at once, but I may take it out.

Going from memory, I think the wires attach to the pot in the same order (white in the middle)

One cool thing is being able to use the ICS port for transponder power instead of tapping battery posts, that way the transponder turns off with the power switch.
__________________

[mini-z gallery
[/color]

Last edited by SuperFly; 2017.10.17 at 10:27 PM.
SuperFly is offline   Reply With Quote
Old 2017.10.18, 07:49 AM   #17
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 32,723
Send a message via AIM to arch2b
FHS board does not have the same color wiring to the pot that the ASF board does.
It looks like the servo power wiring order is reverse from the MR-03 ASF board meaning i need to go back and move some wires around. i had simply copied wire positions over from one to the next.

Last edited by arch2b; 2017.10.18 at 07:52 AM.
arch2b is offline   Reply With Quote
Old 2017.11.04, 09:55 PM   #18
herman
Registered User
 
Join Date: Nov 2001
Location: makati, philippines
Posts: 8,462
Greetings... any pics of an installed board? Is this still available? Wanting to get one for my completely stock mr03 which all of a sudden died (no power or steering), also for some AM cars I want to convert. Would appreciate any info where to get them.
herman is offline   Reply With Quote
Old 2017.11.05, 12:03 AM   #19
SuperFly
bitPimp
 
SuperFly's Avatar
 
Join Date: May 2004
Location: Portland, Oregon
Posts: 337
Send a message via AIM to SuperFly
Quote:
Originally Posted by herman View Post
Greetings... any pics of an installed board? Is this still available? Wanting to get one for my completely stock mr03 which all of a sudden died (no power or steering), also for some AM cars I want to convert. Would appreciate any info where to get them.
banggood.com

I know there are rules about posting links to other stores, but I couldn't find the specific policy, so hopefully this is okay: https://www banggood com/DasMikro-2_...r_warehouse=CN shipping was about two weeks.

I installed mine into an MR02 chassis, so I had to do a little cutting on the PCB cover to make room for the ICS port and the gyro port/pairing button. Otherwise, the width is the same as MR02 board, and the pins line up, so it just drops in and fits nicely. Installation was easy, and pairing with an EX-1 UR / 901sm worked the first time.





__________________

[mini-z gallery
[/color]

Last edited by mleemor60; 2017.11.05 at 04:37 PM. Reason: link with pricing
SuperFly is offline   Reply With Quote
Old 2017.11.05, 08:50 AM   #20
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 32,723
Send a message via AIM to arch2b
DasMikro 2.4G KYOSHO ASF Compatible Mainboard For Micro Racing Cars
arch2b is offline   Reply With Quote
Old 2017.11.07, 06:23 AM   #21
herman
Registered User
 
Join Date: Nov 2001
Location: makati, philippines
Posts: 8,462
Many thanks for the pics and the link. Very much appreciated. Was it easy to solder the wires on? Did you encounter any problems?

For the mr02, servo motor is connected as indicated in the above diagram, and we are to add an additional wire for the pot?

How does it run compared to the original mr03 board?

Thanks again.

Last edited by herman; 2017.11.07 at 07:02 AM.
herman is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS- (1)mr-01 pcb & (1) F1 pcb bobbyz Mini-Z Marketplace 2 2009.08.13 02:55 PM
FS: Overland/Monster PCB AND WTB: MR-015 Parts MINIz guy11 Mini-Z Marketplace 8 2009.01.14 09:47 AM
PCB problems (steering) michvin Parts and Hop-ups 14 2005.12.02 11:00 AM
Iwaver PCB vs. Mini z PCB Dustin Miscellaneous Discussion 2 2005.03.14 01:00 AM
New Iwaver PCB and Chassis Set Jackd iWaver 30 2004.11.22 12:29 PM


All times are GMT -5. The time now is 05:40 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts