Can anyone tell me if the double A arm front suspension is compatible with the MR03 evo that was just released. the moulded plastic top seems to protrude past the cross member, If so will PN be making a new version? thanks in advance
When mounting the PN A-arm there has always been material removal involved on the front of an MR02 or MR03. I imagine nothing different will change for the 03Evo.
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
yes Im familiar however the MR 03 evo (new car) plastic is designed differently on the top , where the brace for the double A arm sits. the car is pretty new to the market but Im assuming PN would have a definitive answer or a revision for the evo.
I would assume that the same process would be applied to the EVO as would be done with the standard MR03. Just that you would snip the hinges off the tower bar rather than the entire servo cover. Finally able to open the servo without needing to remove the A-Arm! I would assume that you could also just use a simple standoff of the same height as the tower rather than snipping it down to size (which would leave a gap for dust entering the servo but could be sealed with tape).
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
Saw a post at the FB 1:28 community about the PN A-arm and Evo compatibility. A picture detail and description is in place for those looking to convert while keeping plenty of tower arm height adjustments for roll center and camber gain.
Emu over explained the mod so whatever i say here would just be parroting (sounds cool but doesnt do it full justice)
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
Saw a post at the FB 1:28 community about the PN A-arm and Evo compatibility. A picture detail and description is in place for those looking to convert while keeping plenty of tower arm height adjustments for roll center and camber gain.
Emu over explained the mod so whatever i say here would just be parroting (sounds cool but doesnt do it full justice)
I totally misread what he was asking about. I was notified and all that I saw was that picture, didn't realize it was modified because I don't have an a-arn for 03. When I finally saw the whole post of pics, I felt a little foolish.
For those that don't use FB. The bottom of the tower bar looks like it needs clearancing for the servo cover. Why he cut expensive metal instead of cheap plastic, I am not sure. He might have his reasons...
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
I totally misread what he was asking about. I was notified and all that I saw was that picture, didn't realize it was modified because I don't have an a-arn for 03. When I finally saw the whole post of pics, I felt a little foolish.
For those that don't use FB. The bottom of the tower bar looks like it needs clearancing for the servo cover. Why he cut expensive metal instead of cheap plastic, I am not sure. He might have his reasons...
Hey EMU , the FB posting is of my car !! the plastic chassis parts weren't available yet so I just went with my plan in retrospect I could have waited for the chassis spares and looked at it but Im happy with the aesthetic results.... .. once I get ot on the track ill see if the package works well. I am very happy with my SS car that I ran last week( PN 2.5 chassis w/ AA front) . See you this weekend!!!
Hey EMU , the FB posting is of my car !! the plastic chassis parts weren't available yet so I just went with my plan in retrospect I could have waited for the chassis spares and looked at it but Im happy with the aesthetic results.... .. once I get ot on the track ill see if the package works well. I am very happy with my SS car that I ran last week( PN 2.5 chassis w/ AA front) . See you this weekend!!!
See, I knew you had your reasons... plus, it shouldn't effect performance or reliability. You're making me nervous. If this car runs like your SS car, you'll be flying.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»