I'm damn pleased!! This chassis seems to be of a higher quality than the other 2 bits I have. I would put the 2.2, 2.6, and 3.0 motors in my 6 month old RX-7, and as the motor #'s went up, torque went down & top speed went up...with the new bit, each motor had as much torque as before, just alot more top speed!! With the 3.0, it was psycho-mad fast...I'm going to have to do another mini-z vs. bit char-g race if I can find somewhere that will give my bit traction!!!
Any chance of a good close-up pic of them with the bodyshell removed?
Also, Id love to see a clear pic of the wheels.
Another question: Do they have a diff?
__________________
My Mini Z mods
CLK D2
Z-Speed Alloy Wheels
Kyosho Rear shock and Roll shocks
Kyosho front stabilizer
Kyosho Kingpin and front springs
TopCAD alloy bulkhead
TopCAD alloy motor mount(silver)
Energizer NiMH
my pics
I'll take the whole thing apart, except for taking the speed control chip out, it's pretty fragile & I almost broke my RX7's when I had to adjust the filter on it.
But, I will as soon as I get back to my apartment, which won't be for another day or two.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»