Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2009.08.01, 12:17 AM   #61
CristianTabush
Registered User
 
CristianTabush's Avatar
 
Join Date: Feb 2005
Posts: 1,683
I have not tried dying them. I would just mark them with a sharpie to tell them apart. The reason why I chose white delrin was to be able to identify wear easily and be able to replace them when necessary.
__________________
Cristian Tabush
REFLEX RACING USA
10 Time Mini-Z World Champions!!!
http://www.reflexracing net
CristianTabush is offline   Reply With Quote
Old 2009.08.01, 12:18 AM   #62
CristianTabush
Registered User
 
CristianTabush's Avatar
 
Join Date: Feb 2005
Posts: 1,683
Tim, good to know they worked out for you Funny you say they were snug on the PN Shaft. Was there perhaps a little bit of burring left in the center hole?

Thanks for the feed back I really appreciate it guys...
__________________
Cristian Tabush
REFLEX RACING USA
10 Time Mini-Z World Champions!!!
http://www.reflexracing net
CristianTabush is offline   Reply With Quote
Old 2009.08.01, 04:16 AM   #63
pedrocamp
Ain'tSoldEm
 
Join Date: Jul 2006
Location: Mooresville, NC
Posts: 860
I ordered two and one of them was tight on the PN shaft, nothing a deburr-scraper tool won't take care of though. My car felt faster out of the corner and diff action was improved, thanks Reflex...
pedrocamp is offline   Reply With Quote
Old 2009.08.01, 06:00 AM   #64
dvsstrike
The name is Tim
 
dvsstrike's Avatar
 
Join Date: Aug 2008
Posts: 417
no burr in the hole. just snug. i just ran a reamer through it
__________________
Team Associated
dvsstrike is offline   Reply With Quote
Old 2009.08.01, 08:29 AM   #65
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
interesting, about the snug fit although its better to be tight than loose in this situation but we did not come across that in testing. has anybody tried the RR spur with a complete qtec setup along with either the PN al shaft or 3r ti shaft yet? i would like to have some feedback from a PN70 car.
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2009.08.01, 08:30 AM   #66
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
to answere your question Tom, the dye will not effect the delrin. this brings up a point though. i think i can get grey black and white delrin.
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2009.08.01, 08:39 AM   #67
CristianTabush
Registered User
 
CristianTabush's Avatar
 
Join Date: Feb 2005
Posts: 1,683
Check the OD on your PN Shafts... Make sure they are the same. These were all cut on a NASA- precision CNC Machines. I will start checking the spurs for these inconsistencies as well. Glad you all like them so far...
__________________
Cristian Tabush
REFLEX RACING USA
10 Time Mini-Z World Champions!!!
http://www.reflexracing net
CristianTabush is offline   Reply With Quote
Old 2009.08.01, 11:06 AM   #68
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
the same drill was used for all of the parts and they were drilled at the same time so the hole sizes are all the same. so either there is a burr on the hole or the PN shaft may be on the high side of their tolerance.the drill cannot make a smaller hole its impossible but it can make a bigger hole.
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2009.08.01, 12:38 PM   #69
EMU
EMUracing
 
EMU's Avatar
 
Join Date: Oct 2004
Location: NYC
Posts: 7,417
Send a message via AIM to EMU
I am going to be building a Qteq/3Racing ti/Kyosho plate diff with Reflex balls and spurs... just need to find my shaft, I misplaced it
__________________
EMUracing
Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
EMU is offline   Reply With Quote
Old 2009.08.01, 02:47 PM   #70
dvsstrike
The name is Tim
 
dvsstrike's Avatar
 
Join Date: Aug 2008
Posts: 417
Talking

i hate when i misplace my shaft! but the topic at hand...i'm running all qtec an the pn alum sfat as well as nitride diff balls, works awsome with the pn70t.
__________________
Team Associated
dvsstrike is offline   Reply With Quote
Old 2009.08.01, 03:08 PM   #71
CristianTabush
Registered User
 
CristianTabush's Avatar
 
Join Date: Feb 2005
Posts: 1,683
Just got done measuring a fairly large sample of each. The Spurs vary within 0.1mm in ID, the Shafts vary within 0.1mm in OD. If you happen to get a big shaft and a small spur, this is a 0.2mm variation, which would account for them being a little tight. So neither product seems to be flawed. I much rather have tight than loose fit though.
__________________
Cristian Tabush
REFLEX RACING USA
10 Time Mini-Z World Champions!!!
http://www.reflexracing net
CristianTabush is offline   Reply With Quote
Old 2009.08.01, 04:08 PM   #72
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
Quote:
Originally Posted by dvsstrike View Post
i hate when i misplace my shaft! but the topic at hand...i'm running all qtec an the pn alum sfat as well as nitride diff balls, works awsome with the pn70t.
so going from your normal diff to the "super" diff what driving characteristics did you notice? were you able to run faster times?
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2009.08.01, 07:33 PM   #73
pedrocamp
Ain'tSoldEm
 
Join Date: Jul 2006
Location: Mooresville, NC
Posts: 860
I am running the full QTEQ kit with the PN aly shaft. I tried both spurs on this same shaft and found one snug and one that fit nicely. I agree it is just tolerance overlap, I'd rather have them slightly snug and finish to fit than loose. I found that I didn't have to crank down on the diff as much and the car accelerated better. My diff has a bit more noise than I did with the PN 53T. I changed pinions and still had the gear noise, a little quieter though. I will have to fit up my other spur gear and see how noisy that one is. Both my pinions are used, the second one has very few laps though. I will try a new pinion as well.
pedrocamp is offline   Reply With Quote
Old 2009.08.02, 12:21 AM   #74
bobbyz
Registered User
 
Join Date: Oct 2003
Location: SoCal
Posts: 439
just wanting to check if these new spurs will fit on a Kyosho MR-01 diff shaft also?

thanks, bob
bobbyz is offline   Reply With Quote
Old 2009.08.02, 03:55 AM   #75
CristianTabush
Registered User
 
CristianTabush's Avatar
 
Join Date: Feb 2005
Posts: 1,683
They are going to make a little more noise than the plastic ones if not meshed correctly because the material is much harder, this is just a property of harder materials.

As for fitting the MR01 diff, It should, I can't think of why it would not work.
__________________
Cristian Tabush
REFLEX RACING USA
10 Time Mini-Z World Champions!!!
http://www.reflexracing net
CristianTabush is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
building a pan car jonnywachter Mini-Z Racer MR-02 49 2009.07.07 04:53 PM
Reflex Racing MR02 Setup Sheet ruf Setups 24 2005.04.07 09:07 PM
Reflex Racing exclusive F1 setup sheet! ruf Mini-Z F1 MF-010, MF-015 9 2005.04.06 10:19 AM
Spur gears mini-z racing Setups 1 2005.02.13 07:06 PM
PN Racing Delrin Spur Gear query revzalot Parts and Hop-ups 1 2005.01.09 01:53 PM


All times are GMT -5. The time now is 04:20 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts