ok i was in the proses of switching chases, i got the clear blue one, well every thing seamd to go fine (striped some screews) no when i turn it on to drive it just starts to smel funy, and it dosnt drive or stear or anything, and it gets raely hot. any info on whats wrong and what i can do about it.
I know what's up, when you put the power wires back in, you got them reversed. I'm talking about the wires that get screwed in by the piece with the 2 prongs that hold the ESC board down...switch those. That happened to me the first time I rebuilt my Z. Make sure the positive (red) wire is on the spur gear side of the car, and the negative (black) wire is on the non-spur gear side of the car.
If that's not your problem, I'll be a monkey's uncle.
Ummm, well, u got me there...I hope you didn't burn anything up if you left it on too long with reversed polarity flowing through the board. A soon as I saw mine wasn't working right, I pretty much knew what was up, so I switched the wires and all was good, but if it's still doing the same thing, I don't know what else to tell ya, sorry dude, I did what I could If I think of something else, I'll tell you first thing.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»