Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2010.06.30, 07:09 AM   #76
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Quote:
Originally Posted by EMU View Post
Its the screw right behind of the tie rod. The screw provided is an alternate size head, so I use a different counter-sunk philips so if I need to remove the bumper, I dont have to pull a different tool out.
TKs Eugene, I see where it would be mounted. Pretty much for now I just have to use alternative front end protection until some ETA information will be available at shop.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS

machgo5go is offline   Reply With Quote
Old 2010.06.30, 08:49 AM   #77
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
They will be ready to ship tomorrow! They tend to go quick so get your order in!
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2010.06.30, 11:40 AM   #78
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Quote:
Originally Posted by MantisMMA View Post
They will be ready to ship tomorrow! They tend to go quick so get your order in!
YEA, So hopefully I will get your fine works in few days!
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS

machgo5go is offline   Reply With Quote
Old 2010.07.04, 04:19 PM   #79
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
little bit of a revision on the V2 wing, and this is my LH replica...finally!



__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2010.07.07, 07:14 PM   #80
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Quote:
Originally Posted by MantisMMA View Post
little bit of a revision on the V2 wing, and this is my LH replica...finally!



Looks great and still waiting. Hopefully V2 will arrive any day now.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS

machgo5go is offline   Reply With Quote
Old 2010.07.12, 08:32 AM   #81
machgo5go
DJ Eddie!
 
machgo5go's Avatar
 
Join Date: Jan 2010
Location: Scary North East
Posts: 1,166
Quote:
Originally Posted by machgo5go View Post
YEA, So hopefully I will get your fine works in few days!
Finally got it but decide on your V1 instead in more durability then V2 without making a mess in gluing.
Got to give you credit that it is strong and nothing broken in front end at brutal races.
Now stock rear end pod is cracked so awaits for PN Rear Pod so I can try out your T- plate.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R

***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT


DG DESIGNS

machgo5go is offline   Reply With Quote
Old 2010.10.20, 10:20 PM   #82
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 33,249
Send a message via AIM to arch2b
i finally had the opportunity to order the front wing and choose the v1 as it just looks more durable.
i have to ask, why include hex head screws that are not a common size to what other manufacturers are using? i went to install my wing tonight only to realize the screws are too small for the standard 1.5mm and too big for the .9mm hex head drivers. these are the two most common sizes used by both pn and atomic. i literally do not have any other hex head drivers.
i had a major complaint about pn releasing kits without tools to install them when they were not standard size. i find myself now in the same position with this front wing.

what size driver is needed? perhaps this should be included in the 'needed to install' portion of the instructions. i'm racing f1 in the als charity race this saturday and now i have to wait and hope someone at the race has the right driver.

props for choosing hex head screws though

Last edited by arch2b; 2010.10.20 at 10:47 PM.
arch2b is offline   Reply With Quote
Old 2010.10.20, 10:38 PM   #83
wrcsti
Registered User
 
Join Date: Sep 2010
Posts: 11
Wallmart has these keychain like things, its something like 2 for $3 and together you have most hex sizes.
wrcsti is offline   Reply With Quote
Old 2010.10.20, 10:45 PM   #84
EMU
EMUracing
 
EMU's Avatar
 
Join Date: Oct 2004
Location: NYC
Posts: 6,957
Send a message via AIM to EMU
I luckily have one of the appropriate sized hex keys on my leatherman. It is an imperial size, although the specific size escapes my memory at the moment.
__________________
EMUracing
Reflex Racing /Mantis Worx /HKS Hobby /DG Designs /GSR /Team Scream Racing /Cruizin With RC's /Fast By Faqish
EMU is offline   Reply With Quote
Old 2010.10.20, 10:49 PM   #85
VAzRACER
Team Reflex
 
VAzRACER's Avatar
 
Join Date: May 2007
Location: northern va
Posts: 739
Its either .50" or 1/16".
__________________
Matt Ward

Reflex Racing Mantis Worx DG-Designs Psycho Cells
VAzRACER is offline   Reply With Quote
Old 2010.10.21, 12:05 AM   #86
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
the proper size is .050 non metric. i use these screws because they are 2-56 which is slightly bigger/stronger than the std 2mm screws i can only get this size in aluminum SHCS. you can use std self thread screws until you find the proper size alen wrench if you like. sorry for your confusion.
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Old 2010.10.21, 01:42 PM   #87
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 33,249
Send a message via AIM to arch2b
i'm sure someone at the event will have a wrench unless i can find one at a hardware store friday.

if i could suggest, adding that tid bit of information to the product information would be very helpful. as my experience with the PN product, it was frustrating to finally have been able to order a highly praised product only to realize upon arrival that crucial information regarding it's assembly simply is not provided anywhere. its not much fun staring at a bunch of bits on the table with nothing to assemble them with. the bits look good though.

tools required is always helpful information to provide

Last edited by arch2b; 2010.10.21 at 01:46 PM.
arch2b is offline   Reply With Quote
Old 2010.10.21, 02:43 PM   #88
VAzRACER
Team Reflex
 
VAzRACER's Avatar
 
Join Date: May 2007
Location: northern va
Posts: 739
Ray, I'll bring a wrench with me you can use.
__________________
Matt Ward

Reflex Racing Mantis Worx DG-Designs Psycho Cells
VAzRACER is offline   Reply With Quote
Old 2010.10.21, 09:17 PM   #89
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 33,249
Send a message via AIM to arch2b
Quote:
Originally Posted by VAzRACER View Post
Ray, I'll bring a wrench with me you can use.
thanks matt. i tore through my entire box and did find a small wrench that fit! if i recall, it came from an alloy pinion set of some kind.
arch2b is offline   Reply With Quote
Old 2010.11.21, 06:34 PM   #90
MantisMMA
tire schredder
 
MantisMMA's Avatar
 
Join Date: Sep 2008
Posts: 864
i am still here guys, been going through a bunch of crap with this hobby shop thing (which is not working out as planned) and the lack of anywhere to test anything in houston. i have been talking with EMU and Matt and i am going to come up with something sick for next year since apperently the floodgates have been opened up to do pretty much whatever we want to the cars!
__________________
MantisWorx
www.rcshox.com
professional RC products

Marcus Williams
MantisMMA is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mini-z bodies / readysets in stock Tim Johnson Kyosho 6 2007.05.23 09:42 PM
So, can anyone actually buy this Spoon Mini-Z F1 MF-010, MF-015 32 2005.03.16 11:00 AM
F1 front bumper is different then older ones. 46u Mini-Z F1 MF-010, MF-015 0 2004.11.12 08:35 PM
My F1 front wing FW26 West Bodies 9 2004.08.19 06:58 PM
Does 9.5mm Tires fit AMG Front Wheels? NSX-Fan Parts and Hop-ups 4 2003.02.14 10:35 PM


All times are GMT -5. The time now is 03:46 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts