im going to build tom another evo to try out,it will have a few of the most commonly used xmod upgrades.
spider v3
liths
atm awd motor
bearings
awd
carbon shaft
a few alloy bits to help the geometry
gpm rims
alloy chassis
this may work out to be a bit more money than the z but i still doubt it will win.
i was thinking of putting an iw pcb into an evo,maybe next time
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
I got to give it to the last one that if the Evo could go a whole lap without not responding, the total lap time would have been a good 10/15 seconds shorter.
im going to build tom another evo to try out,it will have a few of the most commonly used xmod upgrades.
spider v3
liths
atm awd motor
bearings
awd
carbon shaft
a few alloy bits to help the geometry
gpm rims
alloy chassis
this may work out to be a bit more money than the z but i still doubt it will win.
i was thinking of putting an iw pcb into an evo,maybe next time
IMO I would dump the Liths. It only needs handling upgrades and slop taken out of it. Liths on any car are worthless unless you are on a big track with lots of straights and sweepers. It could definately use a motor upgrade.
i was gonna fit the liths as most xmodders fit them,maybe we will keep the power supply the same and up the motor a little
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
I wouldn't write off Li-ion/poly as useless. Frankly, an Xmod Evo has such a weak servo that it needs 7.2V to function with any kind of speed. Then wind some kind of a high-wind motor (RIP Calvin, who made the crazy 70t pattern-wound armatures) and you can harness the 7.2V to the board without being excessively fast.
thats what i was thinking tom,that motor sounds interesting mr 0,any ideas on the gauge of the wire?
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
every one says that the evo sucks. make it awd like it is built for and race with the awd kyosho.if the company took time and made everything tight and put a real radio in it. it would take the awd kyosho.the battery set up alone is 100 times better.plus the kyosho has the same problems.the gears strip the blue & gray chassis breaks
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»